WOODWARD 5466-1002 MicroNet Plus Power Supply Module

Product Description

The WOODWARD 5466-1002, also cataloged as the 5466-1002 Power Supply Module, operates as a dedicated hardware component for AC-to-DC power conversion within the Woodward MicroNet Plus control platform. It accepts regulated AC input power and delivers stabilized internal DC supply rails for processor modules, communication interfaces, and I/O assemblies installed in the same chassis.

Suffix Breakdown & Model Matrix

The supplied documentation identifies 5466-1002 as a fixed catalog number. No official suffix breakdown or ordering matrix is specified by the manufacturer for this model. Therefore, no suffix interpretation is provided.

Hardware Specifications

Actuator Loop Power Stability and Thermal Dissipation

The 5466-1002 power supply maintains regulated DC outputs required by the MicroNet Plus backplane. Stable output voltage allows processor modules and I/O assemblies to maintain consistent execution during normal operating conditions. In addition, the module supports continuous internal power distribution while its thermal design enables heat transfer through the chassis airflow path. Proper chassis ventilation therefore helps maintain electrical stability and extends component operating life.

Frequently Asked Questions

Q: Does the WOODWARD 5466-1002 support hot replacement while the controller is energized?

A: The available product information does not specify hot-swap capability. Module replacement should follow the maintenance procedures defined for the MicroNet Plus control system and should be performed with system power isolated unless the official maintenance documentation explicitly permits energized replacement.

Q: Can this power supply operate with worldwide industrial AC power systems?

A: Yes. The specified input range of 180 to 264 VAC at 50 / 60 Hz allows operation on many industrial AC distribution systems that fall within this voltage range.

Q: Why does the module occupy two chassis slots?

A: The manufacturer specifies a two-slot installation footprint. The additional space accommodates the power conversion hardware and associated thermal management components required for supplying regulated DC power to the control platform.

Field Installation Guidelines

• Verify that the incoming AC supply matches the specified 180 to 264 VAC operating range before energizing the module.
• Disconnect system power before installing or removing the module unless the official Woodward maintenance procedure specifically authorizes energized replacement.
• Fully insert the module into the designated two-slot position and secure the retaining hardware to maintain proper backplane electrical contact.
• Maintain unobstructed chassis airflow around the power supply because adequate cooling supports stable internal operating temperatures.
• Route AC power cables separately from low-level signal and communication wiring to reduce conducted electrical interference.
• Connect protective earth according to the MicroNet Plus installation manual and applicable local electrical regulations.
• After installation, verify that all processor and I/O modules complete normal startup diagnostics before returning the control system to service.

Other Attributes

• Country of Origin:  USA
• Lead Time: In Stock, 2 Working Days
  

In Stock Hot Items of Woodward

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.