Honeywell FTA-T-01 Fail-Safe Digital Input FTA

Product Description

Configured for fail-safe digital signal input, the Honeywell FTA-T-01 (FTA-T-01 Fail-Safe Digital Input FTA) provides 24 discrete channels for field wiring. The module supports specified DC input circuits and incorporates a 250 mA fuse rating for the associated input circuit protection.

Hardware Specifications

Fail-Safe Digital Input Characteristics

The FTA-T-01 provides 24 digital input channels for discrete field signals. Each channel interfaces a physical input circuit with the associated control system hardware. The supplied electrical specification defines a maximum input level of 36 Vac or 50 Vdc under IEC 1010 conditions.

The module specifies a 250 mAT fuse rating. Therefore, field wiring and connected circuits should remain within the documented electrical limits. The terminal arrangement also accepts conductors up to 2.5 mm2 (AWG 14), with a specified 7 mm strip length and 0.5 Nm tightening torque.

For Honeywell DCS installations, verify the FTA wiring assignment against the applicable system hardware documentation before energizing the field circuits.

Frequently Asked Questions

Q: How many digital input channels does the Honeywell FTA-T-01 provide?
A: The FTA-T-01 provides 24 digital input channels.

Q: What voltage limits are specified for the FTA-T-01?
A: The supplied specification lists 36 Vac / 50 Vdc as the maximum voltage under IEC 1010.

Q: What field wire size and terminal tightening torque does the module specify?
A: The maximum wire diameter is 2.5 mm2 (AWG 14). The specified tightening torque is 0.5 Nm (0.37 ft-lb).

Field Installation Guidelines

• Confirm the FTA-T-01 terminal assignment before connecting field circuits.
• Verify that the applied field voltage remains within the specified 36 Vac / 50 Vdc maximum.
• Use conductors within the specified maximum size of 2.5 mm2 (AWG 14).
• Strip approximately 7 mm of insulation to match the specified terminal requirement.
• Apply the specified 0.5 Nm tightening torque to terminal connections.
• Route digital input wiring separately from high-energy power wiring where practical to reduce electrical interference.
• Ground cable shields according to the applicable Honeywell system wiring standard.
• Inspect the 250 mAT fuse arrangement before commissioning and after any field wiring fault.
• Verify channel polarity, field voltage, and continuity before applying power to the connected circuits.
• Do not exceed the documented voltage, wire-size, or terminal connection limits.

Other Attributes

• Series: Honeywell FSC
• Country of Origin:  USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of Honeywell

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.