Honeywell FC-TSD0-0824 Signal Conditioning Module

Product Description

Configured for signal conditioning in Honeywell process control systems, the Honeywell FC-TSD0-0824 (FC-TSD0 signal conditioning module) provides electrical conversion between selected temperature or voltage inputs and standardized analog outputs. The supplied data lists thermocouple, RTD, and voltage input capability with 4-20 mA or 0-10 V output options.

Hardware Specifications

Process Signal Conditioning

The FC-TSD0-0824 accepts temperature and voltage signals according to the supplied configuration data. Thermocouple inputs include J, K, T, E, N, S, R, and B types. RTD inputs include PT100 and PT1000.

The module provides standardized analog output options of 4-20 mA and 0-10 V. Therefore, the receiving control-system input must match the installed output configuration.

For thermocouple measurements, cold junction compensation (CJC) affects measurement accuracy at the thermocouple termination point. The supplied information does not specify the CJC method or accuracy, so these parameters require confirmation against the applicable Honeywell documentation.

The stated 1500 V AC isolation rating defines an electrical isolation parameter. It should not be interpreted as a continuous operating voltage between arbitrary terminals without reference to the manufacturer's isolation specification.

Frequently Asked Questions

Q: Which temperature sensors does the FC-TSD0-0824 support?
A: The supplied data lists J, K, T, E, N, S, R, and B thermocouples, plus PT100 and PT1000 RTDs.

Q: What analog outputs does the module provide?
A: The supplied specification lists 4-20 mA and 0-10 V outputs. The exact output configuration should be confirmed for the installed unit.

Q: Does the module require a specified power supply?
A: The supplied information does not state the power supply voltage or power consumption. Confirm these values before energizing the module.

Field Installation Guidelines

Install the module in accordance with the applicable Honeywell hardware documentation and the cabinet manufacturer's mechanical requirements.

Use wiring appropriate for the selected thermocouple, RTD, or voltage input. Keep low-level measurement wiring separated from high-current and high-voltage conductors to reduce electrical interference.

For thermocouple connections, use the correct thermocouple wiring type and observe polarity. Do not substitute ordinary copper extension wire where thermocouple extension or compensating cable is required.

For RTD wiring, maintain the specified sensor wiring arrangement for the installed configuration. Verify terminal assignments before applying excitation or measurement voltage.

For voltage signals, confirm input polarity and range before connection. For 4-20 mA or 0-10 V outputs, verify that the receiving controller channel matches the configured output type.

Connect cable shields according to the Honeywell installation instructions and the site's grounding scheme. Avoid creating unintended ground loops through multiple shield termination points.

The FC-TSD0-0824 has an IP20 protection rating. Therefore, install it inside an enclosure that provides the environmental protection required by the installation location.

Other Attributes

• Series: Honeywell FTA
• Country of Origin:  USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of Honeywell

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.