Honeywell 51305980-836 Redundant C300 Controller Cable

Product Description

Configured for redundancy interconnection in Honeywell C300 control systems, the Honeywell 51305980-836 (51305980-836 Cable) provides direct electrical connection between two redundant C300 controller modules and their associated IOTAs. The cable supports the physical redundancy arrangement required for paired controller operation and coordinates with the system redundancy architecture.

Hardware Specifications

Process Control Redundancy Connectivity

The Honeywell 51305980-836 cable forms the physical connection used in a redundant C300 controller arrangement. Redundancy is implemented with two controller modules and associated IOTAs, while the cable provides the dedicated interconnection required by the hardware configuration.

Unlike field signal wiring, this cable serves the controller redundancy assembly rather than a 4-20 mA HART loop protocol connection. Therefore, it should be routed separately from high-noise power conductors and switching circuits where practical. Correct cable routing also helps maintain the intended electrical environment for the controller redundancy connection.

Honeywell process control architectures can include channel-to-channel isolation and field instrumentation interfaces at the I/O level. However, the 51305980-836 is specifically identified as a redundancy cable for the paired C300 controller configuration.

Frequently Asked Questions

Q: What hardware configuration uses the Honeywell 51305980-836 cable?
A: The cable is used with a redundant C300 controller configuration consisting of two controller modules, associated IOTAs, and a dedicated redundancy cable.

Q: Can the Honeywell 51305980-836 cable be used as a standard field signal cable?
A: No. The supplied information identifies it as a cable for redundant C300 controller hardware rather than a general-purpose field signal or instrumentation cable.

Q: What is the specified environmental operating range?
A: The specified operating temperature range is -40 deg C to +70 deg C.

Field Installation Guidelines

• Verify that both C300 controller modules and associated IOTAs are installed according to the applicable Honeywell hardware arrangement before connecting the cable.
• Confirm the model number 51305980-836 before installation to avoid mixing the redundancy cable with field wiring assemblies.
• Route the cable away from high-voltage power conductors, switching devices, and other potential electrical noise sources where practical.
• Avoid sharp bends, excessive tension, crushing, or repeated mechanical stress during cable installation.
• Observe the specified flex life of 50,000 cycles when the installation includes repeated cable movement.
• Ensure that connectors are fully seated and mechanically secured before system commissioning.
• Do not modify the cable length, connector assembly, or conductor arrangement unless approved by the applicable system documentation.
• Inspect the cable and connector interfaces during maintenance for mechanical damage, insulation wear, or loose connections.

Other Attributes

• Series: Honeywell Experion PKS(C200,C300)
• Country of Origin:  USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of Honeywell

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.