GE IC200PBI001-FG VersaMax PROFIBUS Network Interface Module

Product Description

Configured for PROFIBUS-DP network communication in GE VersaMax I/O systems, the GE IC200PBI001-FG (IC200PBI001 PROFIBUS Network Interface Module) provides direct electrical data exchange between the VersaMax backplane and PROFIBUS fieldbus devices. The module supports PROFIBUS-DP V1 communication across configurable network transmission rates and operates in master or slave communication modes.

Suffix Breakdown & Model Matrix

The supplied information identifies IC200PBI001-FG as a specific catalog model. No verified suffix breakdown or ordering matrix is provided; therefore, no additional suffix interpretation is stated.

Hardware Specifications

Backplane Communication and Industrial Network Integration

The GE IC200PBI001-FG exchanges network data through the VersaMax backplane while managing PROFIBUS-DP communication with connected field devices. Its communication speed range extends from 9.6 kbps to 12 Mbps, allowing the network configuration to match the installed PROFIBUS segment requirements.

In master mode, the module controls communication with up to 125 slave devices. Alternatively, slave mode allows the VersaMax I/O system to communicate with a higher-level PROFIBUS-DP master. The module status, network status, and diagnostic LEDs provide local indication of communication and module operating conditions.

The module draws 3.3 V power from the VersaMax backplane. Therefore, the installed rack configuration must provide the required backplane power capacity for the module and associated I/O hardware.

Frequently Asked Questions

Q: Can the IC200PBI001-FG operate as both a PROFIBUS master and slave?
A: Yes. The supplied specifications identify master and slave operating modes. In master mode, the module controls up to 125 PROFIBUS slave devices. In slave mode, it communicates with a higher-level PROFIBUS-DP master.

Q: What communication speeds does the module support?
A: The module supports PROFIBUS communication speeds from 9.6 kbps to 12 Mbps. The selected network speed must match the configuration and physical requirements of the PROFIBUS segment.

Q: How is the module powered?
A: The IC200PBI001-FG receives 3.3 V power from the VersaMax backplane and has a maximum specified consumption of 150 mA.

Field Installation Guidelines

Install the GE IC200PBI001-FG in a compatible VersaMax I/O system according to the applicable rack and module installation procedure. Verify that the module is fully seated and that the backplane connection is mechanically secure.

Use PROFIBUS-DP cabling and connectors appropriate for the installed network. Maintain the required bus topology and apply termination only at the physical ends of the PROFIBUS segment. Keep communication cables separated from high-current power conductors and variable-frequency drive output wiring where practical.

Connect cable shields according to the site grounding design and applicable PROFIBUS installation practices. Before system commissioning, verify the configured node address, communication speed, master or slave operating mode, and network diagnostics.

Other Attributes

• Series: GE VersaMax
• Country of Origin: USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of The GE General Electric Mark VI 

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

 TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.