GE IC200MDL240 VersaMax Input Module

Product Description

Configured for 120 VAC discrete input acquisition in the GE VersaMax control system, the GE IC200MDL240 (IC200MDL240 Input Module) provides 16 discrete input points using positive-logic signal processing. The module accepts 0-132 VAC input signals and transfers input status through the VersaMax backplane for CPU/NIU intelligent processing.

Suffix Breakdown & Model Matrix

The supplied documentation identifies IC200MDL240 as a complete fixed model designation. No suffix or ordering-matrix breakdown is provided. Therefore, no additional suffix functions are assigned to the model.

Hardware Specifications

VersaMax Backplane and I/O Signal Processing

The IC200MDL240 monitors AC field signals at 16 discrete input points. Each input accepts a nominal 120 VAC signal, while the specified operating range extends from 0 to 132 VAC.

The module uses positive logic, so the input state corresponds to the presence or absence of the defined AC field signal. The module then transfers the resulting point status through the VersaMax backplane for processing by the CPU or NIU.

The supplied data specifies a maximum 5 V backplane current consumption of 30 mA. This value should be included in the backplane power budget when calculating the load of a VersaMax assembly.

The 16-point density provides multiple AC input channels within one module position. System designers should verify the rack configuration, common arrangement, and backplane loading against the applicable VersaMax hardware documentation.

Frequently Asked Questions

Q: What input voltage does the IC200MDL240 accept?
A: The module has a nominal input voltage of 120 VAC and a specified input signal range of 0-132 VAC.

Q: How many discrete inputs are available?
A: The IC200MDL240 provides 16 discrete input points. The supplied product description identifies the arrangement as two groups of 8.

Q: How much 5 V backplane current does the module consume?
A: The specified 5 V backplane current consumption is 30 mA maximum.

Field Installation Guidelines

Install the IC200MDL240 in the specified VersaMax rack or mounting assembly and verify that the module is correctly seated in the backplane.

Before wiring, isolate field power and confirm that the connected circuit matches the module's 120 VAC input specification. Do not apply a voltage outside the documented 0-132 VAC input range.

Route AC field wiring separately from low-level analog, communication, and other noise-sensitive circuits where practical. Maintain appropriate separation according to the site's electrical installation standards.

Verify the field common arrangement before terminating conductors. The supplied data lists the module as two groups of 8 points and also specifies four groups of 1 under "Points per Common"; confirm the actual terminal arrangement against the applicable GE VersaMax hardware documentation before commissioning.

Keep protective earth, cable shields, and signal commons configured according to the system grounding design. Do not use a cable shield as a field signal conductor.

After wiring, check each input circuit for correct voltage and polarity before enabling normal CPU/NIU processing. Confirm the corresponding input states at the controller and verify that the backplane power budget remains within the rack configuration limits.

Other Attributes

• Series: GE Multilin 350 Feeder
• Country of Origin: USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of The GE General Electric Mark VI 

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

 TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.