GE Fanuc IC200ALG260D VersaMax Analog Input Module

Product Description

Configured for analog signal acquisition in the VersaMax PLC platform, the GE Fanuc IC200ALG260D (IC200ALG260 Analog Input Module) provides direct electrical conversion of field voltage and current signals into controller-readable data. The module provides eight single-ended input channels and supports bipolar voltage, unipolar voltage, and 4-20 mA current inputs.

Hardware Specifications

Backplane Bus and I/O Signal Processing

The IC200ALG260D receives analog field signals through eight single-ended input channels. The module accepts +/-10 VDC, 0 to 10 VDC, and 4-20 mA signals and converts the measured input values into 12-bit digital data for the VersaMax controller.

The approximately 5.0 ms input filter response conditions the acquired signal before controller processing. In addition, the module draws approximately 130 mA from the +5 V backplane bus. Therefore, the carrier and backplane power budget must account for the module load together with other installed VersaMax I/O modules.

The eight-channel arrangement provides a fixed I/O density within one module position. Engineers should verify channel grouping, field wiring, and carrier allocation against the specific VersaMax hardware configuration before installation.

Frequently Asked Questions

Q: What analog signals does the IC200ALG260D accept?
A: The module accepts +/-10 VDC, 0 to 10 VDC, and 4-20 mA analog input signals.

Q: How many input channels does the IC200ALG260D provide?
A: It provides 8 single-ended analog input channels arranged as 1 group.

Q: How much backplane current does the module require?
A: The module consumes approximately 130 mA from the +5 V bus.

Field Installation Guidelines

• Install the module on the specified VersaMax carrier or backplane and secure the mechanical connection before applying power.
• Verify the field signal type before wiring each channel. Confirm whether the connected device provides voltage or 4-20 mA output.
• Route analog signal wiring separately from high-current power conductors and switching circuits where practical.
• Use appropriate shielded instrumentation cable for low-level analog signals when the installation environment produces electrical noise.
• Terminate cable shields according to the plant grounding scheme and avoid creating unintended ground loops.
• Confirm field polarity and common connections before energizing the input circuits.
• Check the available +5 V backplane current capacity before installing the module with other I/O modules.
• Verify the controller configuration against the installed module and its actual channel assignments before placing the system into operation.
• Do not apply a signal outside the specified input ranges.
• Inspect the module status indicators after installation and resolve abnormal status indications before commissioning.

Other Attributes

• Series: GE Multilin 350 Feeder
• Country of Origin: USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of The GE General Electric Mark VI 

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

 TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.