Foxboro RH928CA Termination Assembly Cable

Product Description

Configured for physical signal interconnection in Foxboro I/A Series distributed control systems, the Foxboro RH928CA (RH928CA Termination Assembly Cable) provides a direct cable path between termination hardware and the 200 Series I/O subsystem. Foxboro also identifies RH928CA as a successor to legacy part P0928CA. The assembly supports standard FBM and termination assembly interconnections within compatible DIN-rail I/O architectures.

Hardware Specifications

DCS Signal Interconnection Characteristics

The RH928CA carries physical signal connections between compatible termination hardware and the associated Foxboro I/A Series I/O subsystem. Therefore, the cable forms part of the field signal path rather than performing independent signal processing.

The assembly uses the specified polyurethane cable jacket and semi-rigid internal conductor construction. In addition, the cable follows the matching Foxboro FBM and termination assembly interface required by the associated hardware.

For 200 Series I/O installations, the cable should match the termination assembly and FBM configuration defined for the control system. Avoid substituting cables solely by connector appearance because the termination assignment and system architecture must also match.

Frequently Asked Questions

Q: Is RH928CA an active I/O module?

A: No. RH928CA is a termination assembly cable/accessory. It provides physical signal interconnection and does not independently execute I/O processing.

Q: What legacy part does RH928CA replace?

A: The supplied data identifies RH928CA as the successor to legacy part P0928CA.

Q: Can RH928CA connect to any Foxboro I/O module?

A: No. The cable should connect only to compatible Foxboro FBM and termination assembly interfaces within the applicable 200 Series I/O architecture.

Field Installation Guidelines

Install RH928CA between compatible Foxboro termination and I/O hardware according to the applicable system wiring arrangement.

First, verify the RH928CA part identification and confirm compatibility with the installed FBM and termination assembly. Next, route the cable without excessive bending, crushing, or mechanical tension.

Keep signal cabling separated from high-voltage power conductors and strong electromagnetic noise sources where the enclosure layout permits. Maintain the cable jacket and connector interfaces free from damage during installation.

Where the system uses shielded signal wiring, terminate the shield according to the control system grounding design and the associated Foxboro installation documentation. Do not create unintended ground loops through multiple shield termination points.

Before energizing the I/O subsystem, inspect all cable connections for correct seating and verify the associated termination assignment against the system wiring documentation.

Other Attributes

• Country of Origin:  USA Schneider Electric
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of Woodward

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.