Foxboro P0926KM I/A Series Control Module

Product Description

Configured for control-module operation in the Foxboro I/A Series system, the Foxboro P0926KM (P0926KM Control Module) provides electrical control hardware with a specified 120/240 VAC, 50/60 Hz supply interface. The supplied data also specifies status and diagnostic LEDs, 15 W power consumption, and an operating range of -20 deg C to +60 deg C.

Hardware Specifications

Process Control Interface Characteristics

The P0926KM is identified as a control module for the Foxboro I/A Series platform. The supplied specifications do not identify a dedicated 4-20 mA HART interface, FOUNDATION Fieldbus interface, Profibus PA interface, or channel-to-channel isolation rating. Therefore, these functions should not be assigned to the P0926KM without a manufacturer datasheet or system documentation.

The stated 120/240 VAC, 50/60 Hz electrical specification defines the supplied input power range. The approximately 15 W consumption figure should be considered when sizing the associated power distribution and enclosure thermal load.

Status and diagnostic LEDs provide local visual indication. Their specific indication states are not defined in the supplied data and should be verified against the applicable Foxboro I/A Series documentation.

Frequently Asked Questions

Q: What supply voltage is specified for the P0926KM?

A: The supplied specification lists 120/240 VAC at 50/60 Hz.

Q: What is the specified power consumption?

A: The supplied data specifies approximately 15 W.

Q: Does the supplied information confirm hot-swap operation?

A: No. Hot-swap capability is not specified in the supplied information and should not be assumed.

Field Installation Guidelines

• Verify the module identity and applicable I/A Series installation documentation before installation.
• Confirm that the available electrical supply matches the specified 120/240 VAC, 50/60 Hz input requirement.
• Install the module using the applicable DIN rail or panel mounting arrangement.
• Maintain adequate clearance for wiring, inspection, and removal of the module.
• Route power wiring separately from low-level signal and communication wiring where practical.
• Use appropriate protective grounding and enclosure bonding practices for the installation.
• Inspect terminal connections for correct polarity, conductor seating, and mechanical tightness before energizing.
• Check the status and diagnostic LEDs after power-up and compare their indications with the applicable system documentation.
• Do not assume HART, FOUNDATION Fieldbus, Profibus PA, isolation, or hot-swap functions unless confirmed by the applicable Foxboro documentation.

Other Attributes

• Country of Origin:  USA Schneider Electric
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of Woodward

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.