Bently Nevada 330104-00-13-10-02-05 Eight Millimeter Proximity Probe

Product Description

Configured for conductive-target position and vibration measurement in Bently Nevada proximity monitoring chains, the Bently Nevada 330104-00-13-10-02-05 (330104 Eight Millimeter Proximity Probe) provides non-contact sensing of shaft position and dynamic movement. The probe operates with a matching extension cable and Proximitor Sensor. The supplied configuration uses an M10 x 1 case thread, forward mounting, armored construction, and a 1 m total probe length.

Hardware Specifications

Eddy-Current Measurement and Rotor Dynamics

The 330104 probe uses non-contact eddy-current sensing to detect the position of a conductive target. The probe forms part of a complete measurement chain with its extension cable and Proximitor Sensor. This arrangement supports static position measurements and dynamic vibration measurements on fluid-film-bearing machinery.

The sensing chain requires the specified probe, cable, and Proximitor Sensor combination. Therefore, installation should preserve the intended probe-to-target geometry and cable configuration. Gap voltage and calibration should be validated at the Proximitor Sensor during commissioning.

The armored probe construction provides mechanical protection for the cable assembly. The FEP cable insulation supports the specified -52 to +177 deg C operating and storage range. The 75 ohm triaxial cable construction also requires appropriate shielding and routing practices to limit unwanted electrical interference.

Frequently Asked Questions

Q: What target does the 330104-00-13-10-02-05 measure?

A: The probe detects the position and movement of conductive targets without physical contact. In a completed monitoring chain, this supports shaft position and vibration measurements.

Q: Can the probe operate without a matching Proximitor Sensor?

A: The probe is a sensing element within a complete proximity measurement chain. The supplied configuration should therefore be matched with the specified extension cable and compatible Proximitor Sensor.

Q: What mounting torque applies to this probe?

A: The supplied data specifies 11.2 N m recommended mounting torque, with 7.5 N m specified on the first three threads.

Field Installation Guidelines

Install the probe using the specified M10 x 1 case thread and forward-mount configuration. Confirm that the available mounting location provides the required mechanical clearance for the 130 mm case length and 1 m total probe cable length.

Keep the probe sensing end aligned with the intended conductive target. Avoid mechanical contact between the probe tip and rotating machinery. Verify the installed target clearance and calibration against the applicable Bently Nevada sensing-chain requirements before operation.

Route the triaxial cable separately from high-current power conductors and strong electromagnetic interference sources where practical. Avoid sharp bends, excessive mechanical tension, and damage to the FEP insulation.

Maintain the cable shielding and connector interfaces according to the installed Proximitor Sensor wiring requirements. Do not modify the cable, connector, or armor arrangement unless the applicable installation documentation permits the modification.

Before commissioning, verify the probe model, extension cable, Proximitor Sensor, thread configuration, agency approval selection, and delivered certification. Check the gap voltage and signal response as part of the complete proximity measurement chain.

Other Attribute

• Series: 3300 System
• Country of Origin: USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of The 3500 System

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

 TEL: +86 18030205725 E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.

Download the product documentation: