Bently Nevada 330104-00-13-05-02-00 3300 XL Eight Millimeter Proximity Probe

Product Description

Configured for non-contact shaft position, vibration, Keyphasor reference, and speed measurement in the Bently Nevada 3300 XL proximity transducer system, the Bently Nevada 330104-00-13-05-02-00 (330104 Eight Millimeter Proximity Probe) detects conductive target displacement and supplies the corresponding probe signal to the Proximitor Sensor through an extension cable.

Suffix Breakdown & Model Matrix

The supplied data identifies 330104-00-13-05-02-00 as a complete ordering number but does not provide an official field-by-field suffix definition. Therefore, the individual suffix positions are not interpreted here.

Hardware Specifications

Eddy-Current Scaling and Rotor Dynamics

The 330104-00-13-05-02-00 uses an eddy-current sensing principle to measure the distance between the probe tip and a conductive machine surface. The probe itself mounts at the machine location, while the extension cable connects the probe to the Proximitor Sensor.

The Proximitor Sensor processes the probe signal and produces a voltage proportional to the measured target distance. Consequently, the complete transducer chain can represent both static shaft position and dynamic shaft movement.

The specified 5 mm linear range defines the stated measurement span. Within this range, the supplied accuracy specification is +/- 0.1%. The same sensing chain can provide Keyphasor reference and speed information when installed in the corresponding machine monitoring arrangement.

Frequently Asked Questions

Q: What components form the 3300 XL 8 mm proximity transducer system?

A: The system consists of the proximity probe, an extension cable, and a Proximitor Sensor. The probe senses the conductive target, while the sensor converts the probe signal into a proportional voltage.

Q: What measurements can the 330104-00-13-05-02-00 support?

A: The supplied data specifies vibration, shaft position, Keyphasor reference, and speed measurements. The actual measurement function depends on the installed monitoring configuration.

Q: What is the stated linear range and accuracy?

A: The probe has a 5 mm linear range and a stated accuracy of +/- 0.1%.

Field Installation Guidelines

Install the probe at the specified machine measurement location and align its sensing axis with the conductive target. Maintain the required physical clearance and prevent contact between the probe tip and moving machinery.

Connect the probe to the matching extension cable, then connect the cable to the compatible Proximitor Sensor. Keep the signal cable away from high-current power conductors and other strong electromagnetic interference sources where practical.

Maintain the cable shield and grounding arrangement specified for the complete 3300 XL transducer system. Do not alter the probe, extension cable, or connector configuration without confirming compatibility with the installed Proximitor Sensor.

After installation, verify the complete sensing chain before placing the monitoring channel into service. Confirm the probe signal, target clearance, and sensor output against the applicable system documentation.

For vibration and position measurements, verify that the probe location corresponds to the intended shaft measurement point. For Keyphasor and speed functions, verify the target arrangement and monitoring channel configuration before commissioning.

Other Attribute

• Series: 3300 System
• Country of Origin: USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of The 3500 System

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

 TEL: +86 18030205725 E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.

Download the product documentation: