Bently Nevada 16710-30 Armored Accelerometer Cable

Product Description

Configured for signal transmission between the Bently Nevada 16710-30 (16710-30 Armored Accelerometer Cable) and monitoring termination, this cable provides the physical connection for 330400 and 330425 accelerometers. The assembly uses three shielded 22 AWG conductors, armored construction, a 3-socket sensor-end plug, and individual field-end terminal lugs.

Hardware Specifications

Bently Nevada Mechanical Monitoring Interface

The 16710-30 carries the electrical signals between a supported 330400 or 330425 accelerometer and its monitoring termination. Its armored construction provides mechanical protection along the specified 30 ft (9.14 m) route. The three-conductor shielded configuration maintains the sensor signal conductors and cable shield within one protected assembly.

For commissioning, verify conductor continuity and signal polarity before connecting the monitoring circuit. Also verify the shield termination against the controlled installation drawing. Because the sensor case remains isolated, do not create an unintended grounding path through the cable armor or field termination.

Frequently Asked Questions

Q: Which accelerometers can the 16710-30 support?
A: The supplied specification identifies the 330400 and 330425 accelerometers as supported transducers.

Q: What are the electrical reference values for the connected sensor circuit?
A: The specified sensor supply reference is -24 +/-0.5 VDC, with a nominal bias current of 2 mA. The output bias reference is -8.5 +/-0.5 VDC.

Q: What should technicians verify before commissioning the cable?
A: Verify conductor continuity, shield termination, and signal polarity. Confirm the installed interfaces against the controlled commissioning documentation.

Field Installation Guidelines

• Route the 16710-30 along the documented 9.14 m installation path where armored protection is required.
• Maintain physical separation from power conductors to reduce unwanted electrical coupling.
• Secure the armored cable to prevent vibration from transferring mechanical load to the sensor plug or field terminal lugs.
• Terminate the shield according to the approved installation drawing. Avoid unintended shield-to-case grounding.
• Confirm the three-conductor wiring arrangement before energizing the accelerometer circuit.
• Check continuity and signal polarity at the completed installation.
• Confirm the -24 +/-0.5 VDC sensor supply reference and -8.5 +/-0.5 VDC output bias reference during controlled commissioning.
• Keep the complete accelerometer cable path within the stated 305 m (1000 ft) system cable limit.
• Verify the exact cable article, sensor interface, monitoring termination, and installed documentation before final connection.

Other Attribute

• Series: Bently Nevada 3300 System
• Country of Origin: USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of The 3500 System

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

 TEL: +86 18030205725 E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.