Bently Nevada 106765-10 Interconnect Cable

Product Description

Configured for precision signal transmission in TSI machinery protection networks, the Bently Nevada 106765-10 (106765-10 Interconnect Cable) provides direct electrical execution. This 9-conductor assembly routes eddy-current probe signals while maintaining strict impedance matching. Consequently, the cable preserves signal integrity across rotating equipment monitoring loops. Furthermore, the design supports high-frequency data acquisition without degradation.

Hardware Specifications

Eddy-Current Signal Integrity & Cross-Talk Suppression

This interconnect assembly specifically addresses the stringent requirements of eddy-current probe scaling within TSI architectures. The 100 Ohm ±15% impedance profile ensures proper termination matching, which prevents signal reflections that otherwise distort gap voltage validation targets near -10 VDC. Moreover, the 85% braided shielding coverage actively suppresses cross-talk between adjacent conductors. This isolation mechanism proves vital when routing proximity probe signals alongside power or digital lines. Thus, the cable maintains rotor dynamics data fidelity even in high electromagnetic interference environments. Additionally, the ≤50 pF/ft capacitance limit prevents high-frequency signal attenuation during fast transient detection events.

Frequently Asked Questions

Q: Does the 106765-10 support hot-swapping during active TSI monitoring?
A: No. Disconnecting or reconnecting this interconnect cable while the proximitors or monitors are energized disrupts the DC gap voltage bias. Therefore, technicians must de-energize the associated TSI channels before performing any physical termination work to prevent false trip generation or hardware damage.

Q: How does the 100 Ohm impedance tolerance affect signal scaling?
A: The ±15% tolerance accommodates standard industrial variations while maintaining sufficient matching for typical Bently Nevada transducer systems. However, if the total loop impedance deviates significantly due to excessive cable length or additional connectors, the system may require recalibration of the probe scaling factor to ensure accurate displacement measurements.

Q: What is the maximum recommended continuous length for this cable?
A: While the capacitance is rated at ≤50 pF/ft, the maximum usable length depends on the specific proximitors' drive capability and the required frequency response. Generally, keeping the total capacitance below the transmitter's specified limit ensures that the -10 VDC gap voltage remains stable and that high-frequency vibration data does not suffer from phase shift or amplitude loss.

Field Installation Guidelines

First, verify the minimum bend radius of 10x the cable diameter during routing to prevent internal conductor deformation or shield compromise. Next, terminate the 85% braided shield at the monitor chassis ground point using a 360-degree shield termination method; avoid "pigtail" grounding, as this introduces ground loops and degrades cross-talk suppression. Furthermore, maintain physical separation between this interconnect cable and high-voltage VFD output cables or motor feeder lines to minimize induced noise. Finally, torque all connector fasteners to the manufacturer's specified values to ensure consistent mechanical retention and electrical contact resistance over the -40 deg C to +85 deg C operating range.

Other Attributes

• Series: 3300 System
• Country of Origin: USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of The 3500 System

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

 TEL: +86 18030205725 E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.

Download the product documentation: