Armored Sensor Interconnect Cable | Bently Nevada 16710-33

Product Description

Configured for three-conductor signal transmission between a seismic sensor and receiving instrumentation, the Bently Nevada 16710-33 (16710 Armored Sensor Interconnect Cable) provides a shielded and mechanically protected cable path. It uses a three-socket sensor plug at one end and terminal lugs for instrument termination. The specified cable length is 33 ft.

Hardware Specifications

Shielding and Signal Integrity

The 16710-33 uses shielded three-conductor cable construction to carry the sensor signal to the receiving instrumentation. The shield helps control electrical interference when the cable runs near other field wiring. Therefore, installers should maintain appropriate separation from power conductors and avoid unnecessary parallel routing with high-noise circuits.

The armored construction adds mechanical protection along the 33 ft cable route. Secure the cable without crushing, sharply bending, or placing excessive mechanical load on the connector or terminal lugs. Terminate the shield according to the approved system wiring design rather than creating an unplanned grounding path.

Frequently Asked Questions

Q: What sensor connection does the 16710-33 use?
A: The specified sensor-side connection is a three-socket plug. Confirm connector compatibility with the installed sensor before installation.

Q: How many conductors does the 16710-33 contain?
A: The cable contains three conductors, each specified as 22 AWG.

Q: Does the 16710-33 provide mechanical protection?
A: Yes. The cable uses an armored construction. The supplied data does not specify an armor rating or environmental certification.

Field Installation Guidelines

• Verify the three-socket plug against the installed sensor before connection.
• Route the 33 ft cable along the documented sensor-to-instrument path.
• Keep the cable separated from power conductors where the installation design requires noise control.
• Support the armored cable at suitable points and prevent excessive movement at the connector.
• Avoid crushing, severe bends, or mechanical stress on the cable assembly.
• Identify each terminal lug before connecting it to the receiving instrumentation.
• Follow the approved grounding scheme for the cable shield. Do not create an unintended ground loop.
• Inspect the connector and terminal lugs for mechanical damage before energizing the monitoring circuit.
• Confirm signal continuity and correct terminal assignment after installation.
• Do not infer operating temperature, electrical ratings, certification, or modified-assembly approval from the standard cable description.

Other Attribute

• Series: 3300 System
• Country of Origin: USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of The 3500 System

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

 TEL: +86 18030205725 E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.