Armored Sensor Interconnect Cable Bently Nevada 16710-20

Product Description

Configured for shielded signal transmission between a seismic transducer and receiving monitoring equipment, the Bently Nevada 16710-20 (16710 Armored Sensor Interconnect Cable) provides a three-conductor physical connection with a three-socket sensor plug and terminal-lug instrument termination. The 20 ft armored construction provides mechanical protection along the cable route.

Hardware Specifications

Shielded Seismic Signal Interconnection

The 16710-20 carries the electrical signal between the documented seismic transducer and the receiving monitoring equipment. The cable uses three conductors with 22 AWG conductor size and a shielded construction.

The three-socket plug mates with the specified sensor interface, while terminal lugs provide the instrument-side termination. Therefore, technicians should verify the installed sensor connector and receiving terminal arrangement before installation.

The shield requires proper handling throughout the cable route. Maintain shield continuity where the installation design requires it, and terminate the shield according to the monitoring system wiring practice. Avoid routing the cable alongside high-current or high-noise conductors where practical to limit unwanted signal coupling.

Frequently Asked Questions

Q: What sensor-side connector does the 16710-20 use?
A: The specified sensor interface is a three-socket plug.

Q: What conductor configuration does the 16710-20 use?
A: It uses three 22 AWG conductors in a shielded cable construction.

Q: What is the specified cable length?
A: The specified cable length is 20 ft.

Field Installation Guidelines

1. Verify the cable model and 20 ft length against the installation drawing before routing.
2. Confirm that the installed seismic transducer accepts the three-socket plug.
3. Route the armored cable without exceeding its mechanical installation limits.
4. Keep the signal cable separated from power conductors and high-noise wiring where the installation layout permits.
5. Protect the cable from sharp bends, abrasion, crushing, and uncontrolled mechanical movement.
6. Install and secure the armor so it does not transfer mechanical load to the sensor connector or terminal lugs.
7. Identify each instrument-side terminal before connection and follow the applicable wiring diagram.
8. Maintain the shield according to the monitoring system grounding and termination practice.
9. Inspect the connector and terminal-lug connections for secure mechanical engagement before energizing the monitoring circuit.
10. Treat modified cable assemblies separately from the standard 16710-20 description. Confirm any modified construction, rating, or approval requirements from the applicable documentation.

Other Attribute

• Series: 3300 System
• Country of Origin: USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of Bently Nevada

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

 TEL: +86 18030205725 E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.