ABB Robots 3HAC026253-001 DSQC 661 System Power Supply

 Product Description

The ABB 3HAC026253-001, also cataloged as the DSQC 661 System Power Supply, operates as a dedicated power conversion and distribution component for the ABB IRC5 robot controller cabinet hardware.

Hardware Specifications

Industrial Control and Drive Interface Characteristics

The ABB DSQC 661 system power supply is installed within the IRC5 controller cabinet to provide the specified supply distribution path for connected controller hardware. Its electrical interface is defined by ABB robot controller architecture, including keyed board connectors and internal control power routing.

Within ABB automation platforms, cabinet-level power modules must maintain compatibility with the controller backplane and connected electronic assemblies. The DSQC 661 installation format supports integration with ABB robot control hardware where firmware flash compatibility, backplane bus communication velocity licenses, and I/O density scaling depend on the installed controller configuration.

The module does not function as a field signal acquisition device. Its operating role is associated with internal controller power management and the electrical supply requirements of IRC5 cabinet assemblies.

Frequently Asked Questions

Q: Is the ABB DSQC 661 designed for direct field sensor connection?
A: No. The DSQC 661 is a controller cabinet system power supply module. It provides internal power distribution functions for ABB IRC5 controller hardware rather than direct field signal measurement.

Q: Can the DSQC 661 be installed outside the IRC5 controller cabinet?
A: The documented installation location is the controller cabinet. Installation should follow ABB cabinet configuration requirements and connector alignment specifications.

Q: What should be checked before replacing the DSQC 661 module?
A: Verify the exact article code, disconnect mains power before cabinet work, and confirm connector compatibility with the installed ABB controller assembly.

Field Installation Guidelines

Before installation, isolate the IRC5 controller cabinet from mains power and verify the absence of energized circuits. Remove the existing module using appropriate ESD protection procedures to prevent damage to PCB assemblies.

Confirm that the replacement DSQC 661 matches the required article code 3HAC026253-001. Align the keyed ABB board connectors before insertion and avoid mechanical force on connector interfaces.

Maintain proper cabinet cable routing practices. Keep power conductors separated from sensitive control wiring where applicable, and ensure protective grounding connections follow the controller cabinet design requirements.

After installation, inspect connector engagement, restore cabinet power, and verify that the IRC5 controller hardware recognizes the installed power supply assembly according to the controller diagnostic procedure.

Other Attributes

• Series：ABB Robotics
• Country of Origin:  Germany/Finland/Sweden
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of ABB

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.