ABB 3BHE004573R0143 UFC760BE143 Interface Board

 Product Description

Configured for signal and data interfacing within ABB industrial control hardware, the ABB 3BHE004573R0143 (UFC760BE143 Interface Board) provides physical and electrical signal handling between connected control-system components. The board supports data transmission and control-signal exchange within the installed automation architecture. Exact field interface parameters depend on the host system and application configuration.

Hardware Specifications

ABB Industrial Control Interface Characteristics

The UFC760BE143 processes control-system signals at the hardware interface level. It supports the exchange of control signals and data between connected automation components.

The board operates as part of the host control architecture rather than as an independent field controller. Therefore, the host system determines the applicable communication path, signal allocation, and electrical interface conditions.

For ABB control installations, backplane or internal system communication must match the host hardware configuration. Engineers should verify the applicable rack, carrier, connector assignment, and firmware compatibility before installation. The supplied data does not specify a communication protocol, transfer rate, or backplane bus license.

Frequently Asked Questions

Q: What power supply does the UFC760BE143 require?
A: The supplied data indicates typical operation with 24 VDC, but it does not provide a confirmed power-consumption value or detailed supply limits. Verify the host-system documentation before energizing the board.

Q: Does the UFC760BE143 support a specific communication protocol?
A: The supplied information identifies the board as an interface component but does not specify a protocol or data-transfer rate. Engineers should confirm the required communication interface from the applicable ABB system documentation.

Q: Can the board operate independently of its host system?
A: The UFC760BE143 is described as an interface board within an ABB control architecture. Its operating function therefore depends on compatible host hardware and system configuration.

Field Installation Guidelines

Install the UFC760BE143 only in the rack, carrier, or cabinet position specified for the host ABB system.

Before installation, isolate the relevant power source and verify that the board and host assembly are de-energized. Inspect the PCB, connectors, and mating interface for contamination or mechanical damage.

Align the board with the designated guides and connector position. Apply insertion force evenly and avoid mechanical stress on the PCB or connector housing.

Route signal and communication wiring separately from high-current power conductors where the cabinet design permits. Maintain the shielding and grounding arrangement specified by the host-system documentation.

Verify connector orientation, terminal assignment, cable shielding, and grounding before applying power. After installation, inspect board status indicators and confirm communication with the host control system.

Do not apply an assumed field voltage, communication protocol, or connector assignment solely from the UFC760BE143 model number. Confirm these values against the applicable system drawings and ABB technical documentation.

Other Attribute

• Series: ABB Advant OCS/800xA
• Country of Origin:  Germany/Finland/Sweden
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of ABB

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.