8C-PD0DA1 Honeywell | Digital Output Module

Product Description

Configured for discrete output control in the Honeywell Series 8 I/O system, the Honeywell 8C-PD0DA1 51454472-175 (8C-PD0DA1 Digital Output Module) provides 16-channel digital signal output. The module switches field devices through 24 VDC discrete outputs.

Hardware Specifications

Process Control and DCS I/O Characteristics

The 8C-PD0DA1 switches discrete field outputs from the Series 8 I/O architecture. Each channel provides an on/off output signal for connected field circuitry. The supplied data specifies a 24 VDC rated voltage and up to 500 mA per channel.

The module also provides channel status indication through LEDs and includes self-diagnostic functions. Therefore, field wiring should separate discrete output conductors from high-level power wiring where practical. Follow the Honeywell system installation documentation for grounding, shielding, termination, and I/O carrier requirements.

The supplied information does not specify 4-20 mA HART, FOUNDATION Fieldbus, Profibus PA, or channel-to-channel isolation characteristics. These functions should not be assumed for this digital output module.

Frequently Asked Questions

Q: How many digital output channels does the 8C-PD0DA1 provide?
A: The supplied specification identifies 16 digital output channels.

Q: What output voltage does the 8C-PD0DA1 use?
A: The supplied data specifies 24 VDC nominal operation.

Q: Does the module provide channel diagnostics?
A: Yes. The supplied information specifies LED status indication and self-diagnostic functions.

Field Installation Guidelines

Install the module in the designated Honeywell Series 8 I/O hardware according to the applicable system documentation. Before wiring, isolate field power and verify the assigned I/O channel addresses.

Use the specified terminal and carrier arrangement for each digital output channel. Keep field signal wiring separated from high-voltage or high-current conductors to reduce electrical interference. Where shielded cable is required by the installation design, terminate and ground the shield according to the Honeywell grounding specification.

Verify the 24 VDC field supply before connecting loads. Confirm load current against the applicable channel rating before energizing each output. Also verify polarity and field termination to prevent output faults.

Do not assume hot-swap capability, redundant operation, channel isolation, or firmware compatibility unless the applicable Honeywell Series 8 documentation confirms those functions.

Other Attributes

• Series: Honeywell C200 C300
• Country of Origin:  USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of Honeywell

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.