330102-08-96-10-02-00 Bently Nevada 3300 XL 8 mm Proximity Probe
Technical specifications
Manufacturer: Bently Nevada
Condition：New with Original Package
Product Type: Proximity Sensors
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
By submitting a request for this item, you confirm that you have reviewed and accepted our Terms & Conditions. Please note that all transactions will be processed offline.
Ask an expert
Help us reach more people! Share this product with your network and show your support!
Product Description
Configured for radial vibration and axial position measurement in Bently Nevada 3300 XL Transducer Systems, the Bently Nevada 330102-08-96-10-02-00 (330102 3300 XL 8 mm Proximity Probe) provides direct eddy-current displacement sensing against rotating machinery shafts.
Suffix Breakdown & Model Matrix
| Suffix Segment | Decoded Value |
|---|---|
| 330102 | 3300 XL 8 mm Probe base model |
| -08 | Unthreaded length 0.8 in |
| -96 | Overall case length 9.6 in |
| -10 | Total cable length 1.0 m (3.3 ft) |
| -02 | Miniature coaxial ClickLoc connector, standard cable |
| -00 | No agency approval required |
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 330102-08-96-10-02-00 |
| Brand | Bently Nevada |
| Origin | USA |
| Weight | 0.15 kg |
| Dimensions | 1.5 x 1.3 x 117 cm (est. shipping size) |
| Probe Diameter | 8 mm |
| Thread | 3/8-24 UNF with armor |
| Unthreaded Length | 0.8 in (min) |
| Case Length | 9.6 in (min) |
| Total Length | 1.0 m (3.3 ft) |
| Connector | Miniature coaxial ClickLoc |
| Cable Type | Standard coaxial |
| Operating Temp | -34 to 177 deg C (probe tip, standard 3300 XL rating) |
| Power Consumption | Supplied by 3300 XL Proximitor, no standalone power |
Eddy-Current Probe Scaling and Gap Voltage Validation
The 330102 series follows linear eddy-current scaling of 7.87 mV/um (200 mV/mil) across the calibrated range when driven by a 3300 XL Proximitor. Gap voltage must be validated at static shaft center position with a target value of -10 VDC at the Proximitor output for an 8 mm probe against a 42 mm plain carbon steel target. Rotor dynamics data derived from this probe supports both 1X radial orbit reconstruction and thrust collar axial excursion tracking. Cross-talk suppression is maintained by routing the coaxial cable with minimum 150 mm separation from power conductors and grounding the armor braid at the Proximitor end only.
Frequently Asked Questions
Q: Can the 330102-08-96-10-02-00 be hot-swapped while the machine is running?
A: No. The probe and cable assembly must be installed and gap-validated offline. Swapping the probe body changes the eddy-current bridge condition and forces recalibration of the Proximitor gap voltage before returning the channel to service.
Q: Does the 3/8-24 UNF thread require a specific torque value during installation?
A: Yes. The locknut must be tightened to 8.5 N.m (75 lbf.in) typical using a Bently Nevada probe mounting nut wrench. Under-torque causes probe walkout under vibration; over-torque strips the 3/8-24 UNF thread on the probe body.
Q: Is the 1.0 m total length inclusive of the unthreaded and case lengths?
A: No. The 1.0 m total length covers the full probe plus integral cable from tip to ClickLoc connector. The 0.8 in unthreaded length and 9.6 in case length are physical probe-body dimensions exclusive of cable extension.
Field Installation Guidelines
Mount the probe perpendicular to the shaft surface with the tip flush or at the calibrated standoff gap defined by the Proximitor range. Engage a minimum of 5 full threads of the 3/8-24 UNF locknut into the machine bracket. Do not rotate the probe by the cable; always hold the hex body. Ground the armored cable braid at the Proximitor enclosure via the DIN-rail or panel ground bus. Keep the ClickLoc connector unmated until final gap voltage check is performed. Verify probe resistance (tip to case) is open and center conductor to shield is within 7.0 to 9.0 ohm for a 1.0 m assembly before system power-up.
Other Attributes
- Series: 3300 System
- Country of Origin: USA
- Lead Time: In Stock, 2 Working Days
In Stock Hot Items of The 3500 System
| 3500/15 125840-01 | 3500/15 106M1079-01 |
| 3500/50 133388-02 | 1900/65A 172323-01 |
| 3500/15 127610-01 | 3500/72M 140734-08 |
| 3500/45 176449-04 | 3500/93 135785-01 |
| 3500/32 125712-01 | 3500/32M 149986-02 |
| 3500/20 125744-02 | 3500/42M 176449-02 |
| 3500/22M 138607-01 | 135145-01 |
| 3500/25 149369-01 | 106M1079-01 |
| 3500/42M 176449-02 | 126648-01 |
| 3500/15 125840-01 | 135137-01 |
| 3500/42M 140734-02 | 146031-01 |
| 3500/53 133388-01 | 125800-01 |
| 3500/53 127610-01 | 167669-02 |
| 3500/05-01-01-00-00-00 | 128229-01 |
| 133442-01 | 133396-01 |
| 133442-01 | 125720-01 |
Our Competitive Brands
- - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
- - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
- - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
- - Bently Nevada 3300 System, 3500 System
- - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
- - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
- - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider
TEL: +86 18030205725 E-MAIL: manskiwong@cambia.cn
Question 1: Is Our Price Competitive?
NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.
Question 2: What Is The Warranty Period?
We offer a standard one-year warranty for all new and original items.
Question 3: What Payment Methods Do We Accept?
We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.
Question 4: What Shipping Methods Do We Use?
We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.
Question 5: What Is Our Delivery Time?
Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.
Question 6: How Do We Package The Goods?
Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.
Question 7: How Can Customers Contact Us And Request A Quote?
Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.
Download the product documentation:
Click here to view or download the PDF