IS200VRTDH1DAA GE Mark VI RTD Input Board

Product Description

The GE IS200VRTDH1DAA, also identified by the base model IS200VRTDH1A as an RTD input board, is described as an interface for acquiring resistance temperature detector signals within GE Mark VI turbine control systems. It receives analog resistance signals from temperature sensors for processing by the control system. The exact channel configuration and compatibility with Mark VIe require confirmation against the applicable hardware documentation.

Hardware Specifications

RTD Signal Acquisition and Control System Integration

RTD input hardware measures sensor resistance and provides temperature-related data to the turbine control system. Correct signal interpretation depends on the supported RTD type, input wiring configuration, channel setup, and applicable calibration parameters.

The following engineering checks apply to installation and commissioning:

• Verify the supported RTD sensor types and input wiring arrangements against the board documentation.
• Confirm the terminal assignments and channel configuration before connecting field sensors.
• Check cable shielding and grounding practices to reduce electromagnetic interference.
• Verify the board revision and system compatibility before installation.
• Do not assume Mark VIe compatibility solely from the Mark VI designation or the model description.

Frequently Asked Questions

Q: How many RTD input channels does the IS200VRTDH1DAA support?

A: The supplied description reports up to 16 RTD input channels. Confirm the actual channel count and supported sensor configurations using the manufacturer's documentation for the exact board revision.

Q: Can the IS200VRTDH1DAA operate in a Mark VIe system?

A: Compatibility is not established by the supplied information. Verify the board part number, hardware revision, rack interface, and system documentation before integration.

Q: What power consumption should be used for cabinet load calculations?

A: The power consumption and supply loading are not specified in the supplied data. Use the applicable GE hardware manual or electrical specifications to determine the required supply capacity.

Field Installation Guidelines

1. Verify identification: Check the complete part number and board revision against the system bill of materials.
2. Inspect the hardware: Examine connectors, terminal interfaces, and the printed circuit board for physical damage before installation.
3. Isolate the equipment: Follow the site's approved shutdown, isolation, and electrostatic discharge procedures before handling the board.
4. Connect RTD wiring: Follow the documented sensor wiring arrangement and terminal assignments. Do not infer two-wire, three-wire, or four-wire support without confirmation.
5. Manage shielding: Apply the grounding and shielding scheme specified by the control system design. Avoid creating unintended ground loops.
6. Verify configuration: Confirm channel assignments, sensor types, alarm thresholds, and scaling parameters in the control application.
7. Commission the inputs: Compare displayed temperature values with an appropriate reference measurement and investigate abnormal readings before returning the system to service.

Other Attributes

• Series: GE Multilin 350 Feeder
• Country of Origin: USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of The GE General Electric Mark VI 

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

 TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.