Bently Nevada 330425-01-00 Accelerometer
Thông số kỹ thuật
Manufacturer: Bently Nevada
Condition：New with Original Package
Product Type: Piezoelectric Accelerometers
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Bằng cách gửi yêu cầu cho mục này, bạn xác nhận rằng bạn đã xem xét và chấp nhận Điều khoản & Điều kiện của chúng tôi. Xin lưu ý rằng tất cả các giao dịch sẽ được xử lý ngoại tuyến.
Hỏi chuyên gia
Hãy giúp chúng tôi tiếp cận được nhiều người hơn! Chia sẻ sản phẩm này với mạng lưới của bạn và thể hiện sự ủng hộ của bạn!
Product Description
The Bently Nevada 330425-01-00, also cataloged as the 330425 acceleration transducer, measures casing acceleration and converts mechanical vibration into an electrical signal for machinery condition monitoring. Its piezoelectric sensing element supports vibration analysis across a specified frequency range. The complete configuration is identified as 330425-01-00 in the supplied data.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 330425-01-00 |
| Base Model | 330425 |
| Brand | Bently Nevada |
| Product Type | Piezoelectric Accelerometer |
| Measurement | Absolute acceleration |
| Sensitivity | 25 mV/g (2.5 mV/(m/s^2)) |
| Acceleration Range | 75 g peak |
| Frequency Response | 10 Hz to 15 kHz, +/- 3 dB |
| Frequency Response, Tighter Tolerance | 30 Hz to 10 kHz, +/- 10% |
| Amplitude Linearity | +/- 1% up to 75 g peak |
| Broadband Noise Floor | 0.01 g RMS, 10 Hz to 15 kHz |
| Mounted Resonant Frequency | Greater than 30 kHz |
| Transverse Sensitivity | Less than 5% of axial sensitivity |
| Input Voltage | -24 +/- 0.5 VDC |
| Bias Current | 2 mA nominal |
| Output Bias Voltage | -8.5 +/- 0.5 VDC |
| Grounding | Case isolated |
| Operating Temperature | -55 deg C to +121 deg C |
| Storage Temperature | -55 deg C to +121 deg C |
| Shock Survivability | 5,000 g peak maximum |
| Relative Humidity | 100% condensing, non-submerged |
| Case Material | 316L stainless steel |
| Connector | 3-pin MIL-C-5015 receptacle |
| Weight | 99 g typical, excluding cable |
Piezoelectric Vibration Measurement
The 330425 converts mechanical acceleration into an electrical output through a piezoelectric sensing element. The stated sensitivity of 25 mV/g defines the nominal relationship between input acceleration and output signal.
The frequency response determines the usable measurement bandwidth. The specified range extends from 10 Hz to 15 kHz at +/- 3 dB. The tighter amplitude tolerance applies from 30 Hz to 10 kHz.
For machinery monitoring, the acceleration signal can support vibration spectrum analysis, gear-mesh assessment, and investigation of bearing-related vibration components. Actual diagnostic capability depends on sensor mounting, signal conditioning, acquisition bandwidth, and analysis methods.
The sensor requires a compatible constant-current power source and signal-conditioning input. Verify the specified negative supply voltage, output bias, connector wiring, and input compatibility before connecting it to a monitoring channel.
TSI Signal Integration and Installation Verification
The 330425 measures absolute acceleration rather than shaft-relative displacement. It should not be treated as a direct replacement for an eddy-current proximity probe or a velocity transducer without verifying the monitoring system's measurement requirements.
When integrating the accelerometer into a Bently Nevada machinery monitoring system, verify the following:
- Signal scaling: Configure the acquisition channel for the specified 25 mV/g sensitivity and the required engineering units.
- Electrical compatibility: Confirm the constant-current excitation and negative supply requirements against the sensor documentation and signal conditioner.
- Ground isolation: Preserve the specified case isolation and check the grounding arrangement to avoid unintended ground loops.
- Signal interference: Route the sensor cable away from high-current switching conductors where practicable. Follow the monitoring system's shielding and grounding instructions.
- Measurement interpretation: Use acceleration-based processing unless the monitoring channel explicitly supports conversion to velocity or displacement.
Other Attributes
- Series: 24765 and 135613 Case Expansion Transducer Systems
- Country of Origin: USA
- Lead Time: In Stock, 2 Working Days
In Stock Hot Items of The Bently Nevada
Our Competitive Brands
- - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
- - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
- - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
- - Bently Nevada 3300 System, 3500 System
- - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
- - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
- - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider
TEL: +86 18030205725 E-MAIL: manskiwong@cambia.cn
Question 1: Is Our Price Competitive?
NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.
Question 2: What Is The Warranty Period?
We offer a standard one-year warranty for all new and original items.
Question 3: What Payment Methods Do We Accept?
We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.
Question 4: What Shipping Methods Do We Use?
We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.
Question 5: What Is Our Delivery Time?
Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.
Question 6: How Do We Package The Goods?
Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.
Question 7: How Can Customers Contact Us And Request A Quote?
Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.