Bently Nevada 330101-00-13-15-02-00 3300 XL 8 mm Probe

Product Description

Configured for shaft displacement measurement in the Bently Nevada 3300 XL monitoring system, the Bently Nevada 330101-00-13-15-02-00 (330101 3300 XL 8 mm Proximity Probe) provides direct physical signal acquisition through an eddy-current sensing circuit. The probe measures relative shaft position with a 3/8-24 UNF threaded body and 1.5 meter cable assembly.

Hardware Specifications

Eddy-Current Signal Measurement and Rotor Dynamics Interface

The 3300 XL 8 mm Probe uses eddy-current measurement technology to detect shaft displacement relative to the probe tip. The system converts mechanical movement into an electrical output through the compatible Proximitor sensor module. Therefore, correct probe installation and gap adjustment directly affect measurement accuracy.

The probe supports Bently Nevada vibration monitoring configurations where rotor dynamics analysis requires stable displacement feedback. In addition, the probe design supports gap voltage validation procedures, including the standard -10 VDC target reference used during system calibration with compatible transducers.

The probe construction reduces measurement errors caused by mechanical movement when technicians maintain proper mounting alignment, cable routing, and signal grounding practices.

Frequently Asked Questions

Q: What signal type does the 330101-00-13-15-02-00 probe generate?
A: The probe provides an eddy-current displacement measurement signal when connected to a compatible Bently Nevada Proximitor sensor module.

Q: Does this model include an armored cable option?
A: No. The supplied configuration specifies a non-armored probe assembly with a miniature coaxial ClickLoc connector standard cable.

Q: What installation factors affect measurement performance?
A: Probe gap setting, mounting alignment, cable routing, and shielding practices affect the stability of shaft displacement measurements.

Field Installation Guidelines

• Install the 3/8-24 UNF threaded probe body with proper mechanical alignment against the monitored shaft surface.
• Maintain the specified probe gap according to the connected Bently Nevada Proximitor sensor calibration requirements.
• Route the miniature coaxial cable away from high-current conductors and strong electromagnetic interference sources.
• Connect cable shielding according to the monitoring system grounding instructions to reduce electrical noise.
• Verify gap voltage values during commissioning and confirm the expected -10 VDC reference target when applicable.
• Avoid mechanical stress on the ClickLoc connector and cable termination area during installation.

Other Attributes

• Series: 24765 and 135613 Case Expansion Transducer Systems
• Country of Origin: USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of The  Bently Nevada

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

 TEL: +86 18030205725 E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.