Allen-Bradley 1783-MS10T Managed Ethernet Switch Stratix 8000

Product Description

The Allen-Bradley 1783-MS10T, also cataloged as the 1783-MS10T Managed Ethernet Switch, operates as a dedicated hardware component for deterministic network routing and industrial switching tasks within Stratix 8000 platforms. It maps real-time data packets across physical copper or fiber interfaces, enforcing layer 2 switching protocols directly linked to the controller backbone environment.

Hardware Specifications

Deterministic Networks and Firmware Flash Compatibility

This base switch utilizes Cisco IOS network software technology to manage integrated backplane bus communication velocity and latency during heavy industrial payload spikes. The 10-port configuration supports multi-node I/O density scaling across segmented plant floors, processing packets via Profinet and EtherNet/IP deterministic networks. The embedded operating parameters utilize complete firmware flash compatibility with Rockwell Automation Studio 5000 tools, enabling automated module configuration backup and synchronization routines that prevent transmission jitter or configuration drift across industrial cells.

Frequently Asked Questions

Q: Does the 1783-MS10T managed switch support active hot-swap replacement when expansion blocks are connected?

A: No. While specific optical SFP transceiver blocks support hot-plugging, the main 1783-MS10T module must be isolated from its DC power input before disassembly or mechanical rail mounting changes to protect internal electronic logic pathways.

Q: How is the redundant DC power input system structured on this device?

A: The switch includes independent terminal blocks for primary and secondary 24 VDC feeds. Internal diode auctioning logic shifts processing current transparently between sources upon a line voltage drops below baseline inputs, preventing network re-initialization delays.

Q: What role do the dual-purpose ports execute during standard operation?

A: The two dual-purpose ports can be mapped either as 10/100/1000 RJ45 copper paths or as active Gigabit SFP transceiver slots. Only one interface configuration can remain physically active per dual-purpose port at any single execution loop.

Field Installation Guidelines

• DIN-Rail Assembly Procedures: Mount the assembly vertically on standard 35 mm DIN rails. Ensure the top chassis retention hook snaps fully over the rail section before rotating the bottom block into place.
• Terminal Power Termination: Secure the 24 VDC power lines into the removable screw terminal inputs, tightening the contact screws to a maximum torque limit of 0.23 Nm to prevent local contact degradation.
• Conduit and Clearance Boundaries: Maintain a minimum clearance distance of 50 mm on the top, bottom, and sides of the enclosure to support standard convective thermal dissipation. Route the communication conduits separate from AC power arrays.
• Chassis Earth Connection: Terminate a dedicated 14 AWG copper grounding strap from the functional earth screw on the chassis directly to the nearest low-impedance copper master ground bar inside the cabinet enclosure.

Other Attributes

• Series: Allen-Bradley ControlLogix
• Country of Origin:  USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of Allen Bradley

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.