ABB TB840A 3BSE042558R1 Redundant ModuleBus Unit
Teknik özellikler
Manufacturer: ABB
Condition：New with Original Package
Product Type: Module Termination Units
-
Country of Origin: Germany
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Bu ürünü talep ederek, Hizmet Şartlarını incelediğinizi ve kabul ettiğinizi onaylamış olursunuz. Lütfen tüm işlemlerin çevrimdışı olarak işleneceğini unutmayın.
Bir uzmana sorun
Daha fazla kişiye ulaşmamıza yardımcı olun! Bu ürünü ağınızla paylaşın ve desteğinizi gösterin!
Product Description
The ABB TB840A 3BSE042558R1 is a redundant ModuleBus unit designed for ABB distributed control system I/O configurations. It supports both line redundancy and module redundancy, with dual power input and ModuleBus communication. Furthermore, it distributes 5 V and 24 V power to connected ModuleBus equipment, providing a defined power distribution capacity for redundant I/O arrangements.
Functional Description
The TB840A supports redundant I/O configurations through line redundancy and module redundancy. Its dual-power design provides two power supply paths for the assembly. Meanwhile, ModuleBus communication provides the connection between the unit and the associated control system hardware.
The unit supports vertical or horizontal mounting. However, it is not hot-swappable, so maintenance and replacement procedures must account for this limitation.
Power Supply and ModuleBus Distribution
The unit accepts a 24 VDC input within a range of 19.2 to 30 VDC. Its ModuleBus power distribution supports a maximum current of 1.5 A on both the 5 V and 24 V distribution lines. Power dissipation is rated at 2.5 W.
Wiring and Mechanical Installation
The TB840A supports solid and stranded conductors from 0.2 to 2.5 mm2 (24-12 AWG). The recommended terminal tightening torque is 0.5 Nm. In addition, its mechanical keying system provides 36 different combinations to help distinguish connection configurations.
Correction: Article number 3BSE042558R1 identifies the ABB TU848, not the TB840A. The TU848 is a Module Termination Unit (MTU) for redundant TB840/TB840A configurations. The following product description uses the correct product identification.
ABB Automation+1
ABB TU848 3BSE042558R1 Redundant Module Termination Unit
The ABB TU848 3BSE042558R1 is a Module Termination Unit (MTU) designed for redundant configurations of TB840/TB840A Optical ModuleBus Modems in the ABB S800 I/O system. It provides connections for dual power supplies, two ModuleBus modems, and redundant electrical ModuleBus paths. Furthermore, its mechanical keying system offers 36 configuration combinations to help prevent incorrect module installation.
Redundant ModuleBus Configuration
The TU848 supports redundant I/O configurations by providing separate connections for two TB840/TB840A modems and dual electrical ModuleBus paths. Each modem has an individual power supply connection. Therefore, the unit supports separate power and communication paths within the redundant arrangement.
In addition, the MTU includes a rotary switch for setting the cluster address from 1 to 7. Its mechanical keying system uses two keys with six positions each, providing 36 possible combinations for module configuration.
Power Supply and Electrical Specifications
The TU848 accepts a nominal 24 VDC power input within a range of 19.2 to 30 VDC. Its ModuleBus power distribution supports up to 1.5 A on the 5 V supply and 1.5 A on the 24 V supply.
The unit has a rated insulation voltage of 50 V and a dielectric test voltage of 500 VAC. Its power dissipation is 2.5 W.
Wiring and Mounting
The unit supports vertical or horizontal mounting. Its wiring terminals accept solid and stranded conductors from 0.2 to 2.5 mm2, corresponding to 24-12 AWG. The recommended tightening torque is 0.5 Nm.
Furthermore, the mechanical keying arrangement provides 36 different combinations for configuration identification. The TU848 is not hot-swappable, so maintenance procedures must account for this restriction.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | TU848 |
| Brand | ABB |
| Article Number | 3BSE042558R1 |
| Product Type | Redundant Module Termination Unit (MTU) |
| Product Family | S800 I/O |
| Communication Protocol | ModuleBus |
| Supported Modems | TB840 / TB840A |
| Configuration | Redundant I/O, Dual Power |
| Line Redundancy | Yes |
| Module Redundancy | Yes |
| ModuleBus Connections | Dual Electrical ModuleBus |
| Power Input | 24 VDC |
| Power Input Range | 19.2-30 VDC |
| ModuleBus Current Distribution | 5 V: Max. 1.5 A; 24 V: Max. 1.5 A |
| Mechanical Keys | 36 Different Combinations |
| Cluster Address Setting | 1-7 |
| Hot Swap | No |
| Mounting Orientation | Vertical or Horizontal |
| Acceptable Solid Wire Size | 0.2-2.5 mm2 |
| Acceptable Stranded Wire Size | 0.2-2.5 mm2 (24-12 AWG) |
| Recommended Tightening Torque | 0.5 Nm |
| Rated Insulation Voltage | 50 V |
| Dielectric Test Voltage | 500 VAC |
| Power Dissipation | 2.5 W |
| Width | 124 mm |
| Height | 186.5 mm (including latch) |
| Depth | 47 mm |
| Weight | 0.45 kg |
| Ingress Protection | IP20 |
| Equipment Class | Class I, Earth Protected |
Frequently Asked Questions
Q: What is the function of the ABB TU848?
A: The TU848 is a Module Termination Unit for redundant TB840/TB840A Optical ModuleBus Modem configurations. It provides dual power connections and redundant electrical ModuleBus connections for redundant I/O arrangements.
Q: What is the difference between the TU848 and TU849?
A: Both units support redundant TB840/TB840A modems and individual power supply connections. However, the TU848 supports dual ModuleBus connections for redundant I/O, while the TU849 supports a single ModuleBus connection for non-redundant I/O.
Q: Does the TU848 support hot swapping?
A: No. The TU848 is specified as non-hot-swappable. Maintenance and replacement must therefore follow the applicable system shutdown and isolation procedures.
Other Attributes
- Series: Advant OCS/800xA
- Country of Origin: Germany/Sweden/Finland
- Lead Time: In Stock, 2 Working Days
In Stock Hot Items of ABB
Our Competitive Brands
- - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
- - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
- - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
- - Bently Nevada 3300 System, 3500 System
- - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
- - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
- - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider
Question 1: Is Our Price Competitive?
NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.
Question 2: What Is The Warranty Period?
We offer a standard one-year warranty for all new and original items.
Question 3: What Payment Methods Do We Accept?
We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.
Question 4: What Shipping Methods Do We Use?
We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.
Question 5: What Is Our Delivery Time?
Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.
Question 6: How Do We Package The Goods?
Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.
Question 7: How Can Customers Contact Us And Request A Quote?
Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.