330707-00-20-10-02-00 Bently Nevada 3300 XL 11 mm Probe

Product Description

Configured for non-contact shaft displacement measurement in a 3300 Series monitoring system, the Bently Nevada 330707-00-20-10-02-00 (330707 3300 XL 11 mm Probe) uses an eddy-current sensing element with a 5/8-18 UNF thread and miniature coaxial ClickLoc connector. The supplied configuration specifies a 0.0 in unthreaded length, 2.0 in case length, 1.0 in total length option, and no agency approval requirement.

Hardware Specifications

Eddy-Current Probe and Rotor Dynamics

The 330707 probe operates as part of an eddy-current proximity measurement chain. It senses changes in the electrical characteristics of the target as shaft position changes relative to the probe tip.

The 11 mm probe format supports installation where the available radial space requires a compact sensing head. The 5/8-18 UNF thread provides the specified mechanical mounting interface.

For commissioning, technicians should validate the probe gap and confirm the resulting transducer output against the applicable 3300 system requirements. Bently Nevada eddy-current systems commonly use a negative DC gap-voltage reference, with approximately -10 VDC serving as a typical target for nominal probe positioning when specified by the applicable system documentation.

Because rotor displacement measurements can affect vibration and position channels, technicians should also verify probe polarity, cable continuity, connector engagement, and signal routing before accepting the measurement channel.

Frequently Asked Questions

Q: What mechanical thread does the 330707 probe use?
A: The supplied configuration uses a 5/8-18 UNF thread without armor.

Q: What connector does model 330707-00-20-10-02-00 specify?
A: The configuration specifies a miniature coaxial ClickLoc connector with standard cable.

Q: Does the supplied data specify an operating temperature or power consumption value?
A: No. The supplied product data does not provide specific operating-temperature or power-consumption figures. These values should therefore be taken from the applicable Bently Nevada system documentation.

Field Installation Guidelines

Install the probe with the specified 5/8-18 UNF mounting interface and maintain mechanical alignment with the monitored shaft target.

Keep the sensing tip clear of mechanical interference throughout the complete rotor operating range. Verify that the selected installation position does not allow the rotating target to contact the probe.

Route the coaxial cable away from high-current conductors, switching devices, and other sources of electrical interference. Avoid sharp bends, excessive mechanical tension, and unnecessary cable loops.

Fully engage the miniature ClickLoc connector before commissioning. Inspect the connector and cable for contamination, mechanical damage, or incomplete engagement.

During commissioning, verify probe continuity and confirm the gap-voltage response before connecting the channel to operational vibration or position monitoring logic.

For rotor-dynamics measurements, confirm the probe location, polarity, channel assignment, and scaling against the approved monitoring-system configuration.

Other Attributes

• Series: 24765 and 135613 Case Expansion Transducer Systems
• Country of Origin: USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of The  Bently Nevada

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

 TEL: +86 18030205725 E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.