330101-00-75-20-02-00 | Bently Nevada | 3300 XL 8 mm Proximity Probe

Product Description

The Bently Nevada 330101-00-75-20-02-00, also cataloged as the 330101 3300 XL 8 mm Proximity Probe, operates as a dedicated eddy-current sensing component for shaft displacement measurement within Bently Nevada TSI monitoring systems.

Hardware Specifications

Eddy-Current Measurement and Rotor Dynamics Interface

The Bently Nevada 330101-00-75-20-02-00 uses eddy-current probe scaling to convert shaft displacement changes into proportional electrical signals. The probe generates a localized electromagnetic field near the rotating target surface. Therefore, the connected monitoring module can evaluate vibration amplitude, shaft position, and mechanical movement.

The probe design supports gap voltage validation through standard Bently Nevada measurement practices. During installation, technicians typically verify the probe operating point near the -10 VDC target gap voltage range to confirm correct probe-to-target spacing.

Furthermore, the 3300 XL 8 mm probe series supports rotor dynamics analysis by providing non-contact shaft displacement data. The miniature coaxial ClickLoc connector maintains signal continuity between the probe assembly and the extension cable interface.

Frequently Asked Questions

Q: What sensing principle does the Bently Nevada 330101-00-75-20-02-00 use?
A: The probe uses eddy-current sensing technology to measure shaft displacement without mechanical contact with the rotating target.

Q: What is the purpose of the -10 VDC gap voltage target during setup?
A: The -10 VDC target provides a reference point for validating probe installation gap and confirming proper measurement range.

Q: Does this model include an armored probe design?
A: No. The 330101-00-75-20-02-00 configuration uses an unarmored probe body with a miniature coaxial ClickLoc connector standard cable.

Field Installation Guidelines

Install the probe with the specified 3/8-24 UNF thread engagement and maintain correct mechanical alignment with the rotating target surface.

Route the miniature coaxial cable separately from high-voltage power conductors to reduce electromagnetic interference. Maintain proper cable shielding and connect the shield according to the monitoring system grounding requirements.

Before operation, verify the probe gap voltage, signal polarity, and monitoring channel configuration. Check that the probe tip remains free from mechanical contact during shaft rotation.

Avoid excessive cable bending near the ClickLoc connector area. Confirm that the probe mounting structure provides sufficient mechanical stability for continuous rotor displacement monitoring.

Other Attributes

• Series: 24765 and 135613 Case Expansion Transducer Systems
• Country of Origin: USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of The  Bently Nevada

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

 TEL: +86 18030205725 E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.