IS230TDBTH6A | GE Mark VIe Discrete I/O Terminal Board
Техничке спецификације
Manufacturer: GE General Electric
Condition:New with Original Package
Product Type: Discrete I/O Terminal Boards
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Подношењем захтева за ову ставку потврђујете да сте прегледали и прихватили наше Услове и одредбе . Имајте на уму да ће све трансакције бити обрађене ван мреже.
Питајте стручњака
Помозите нам да допремо до више људи! <стронг>Делите овај производ стронг>са својом мрежом и <стронг>покажите подршку!стронг>
Product Description
The GE IS230TDBTH6A is a TMR discrete input/output terminal board designed for the Mark VIe control system. It supports 24 group-isolated contact inputs and 12 Form C relay outputs. The board works with three PDIO I/O packs to provide a triple modular redundant configuration, with DIN-rail or flat-surface mounting options.
Functional Description
The IS230TDBTH6A handles discrete signal connections between external field devices and the GE Mark VIe control system. It accepts 24 group-isolated contact inputs with nominal DC wetting voltages of 24 V, 48 V, or 125 V.
In addition, the board provides 12 Form C relay outputs for discrete control signals. Its contact input circuits include noise suppression to reduce the effects of electrical surges and high-frequency interference.
TMR Architecture and I/O Pack Configuration
The IS230TDBTH6A uses a Triple Modular Redundant (TMR) architecture with three PDIO I/O packs. Each pack connects to the terminal board through a D-type connector and communicates with the controllers over Ethernet.
The three PDIO connection points serve the following controller connections:
- JR1: Connects to the R controller.
- JS1: Connects to the S controller.
- JT1: Connects to the TMR controller arrangement as described in the hardware configuration.
The three-pack arrangement supports redundant signal processing across the TMR control architecture. The board is not intended to operate correctly with only one I/O pack. Therefore, all three PDIO I/O packs must be considered when checking the required hardware configuration.
Input and Output Characteristics
The contact inputs support three nominal DC wetting voltage levels: 24 VDC, 48 VDC, and 125 VDC. Furthermore, hardware filtering provides a 4 ms input filter to suppress short-duration electrical disturbances.
The relay outputs use silver cadmium oxide contact material. Each Form C relay provides a changeover contact arrangement, allowing the output to switch between normally open and normally closed contact states.
The board also supports an option card for output expansion. However, the available information does not specify the option card model or additional output capacity.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | IS230TDBTH6A |
| Brand | General Electric (GE) |
| Series | Mark VIe |
| Product Type | Discrete I/O Terminal Board |
| Board Configuration | TMR |
| Input Channels | 24 |
| Input Type | Group-isolated contact inputs |
| Nominal Input Wetting Voltage | 24 VDC, 48 VDC, 125 VDC |
| Input Filter | Hardware filter, 4 ms |
| Input Noise Suppression | Surge and high-frequency noise suppression |
| Relay Outputs | 12 |
| Relay Contact Type | Form C |
| Contact Material | Silver cadmium oxide |
| Maximum Response Time (ON) | 25 ms typical |
| Maximum Response Time (OFF) | 25 ms typical |
| I/O Pack | 3 x PDIO |
| Controller Communication | Ethernet |
| I/O Pack Connection | D-type connectors |
| Mounting | DIN-rail or flat-surface mounting |
| Technology | Surface-mount |
| Board Dimensions | 17.8 cm wide x 33.02 cm high |
| Operating Temperature | -30 to 65 deg C |
| Country of Origin | United States (USA) |
Frequently Asked Questions
Q: How many input and output channels does the IS230TDBTH6A provide?
A: The board provides 24 group-isolated contact inputs and 12 Form C relay outputs. It also supports an option card for output expansion, although the additional capacity is not specified.
Q: Does the IS230TDBTH6A support TMR redundancy?
A: Yes. It uses three PDIO I/O packs as part of its TMR configuration. The board is not designed for correct operation with only one I/O pack.
Q: Which wetting voltages are supported by the contact inputs?
A: The specified nominal DC wetting voltages are 24 VDC, 48 VDC, and 125 VDC. The external contact circuit must match the selected input configuration.
Q: What are the response times of the relay outputs?
A: The specified typical response time is 25 ms for both ON and OFF operations.
Other Attributes
- Series: Mark VI IS200
- Country of Origin: USA
- Lead Time: In Stock, 2 Working Days
In Stock Hot Items of The GE Speedtronic Mark V
| DS200TCQAG1BFD | DS200SLCCG3AFG | DS200TCCBG1BED |
| DS200TCQCG1BHF | DS200SLCCG1AHH | DS200TCCBG3ANE |
| DS200TCQCG1BGK | DS200SLCCG1ACC | DS200PCCAG2ACB |
| DS200TCRAG1ACC | DS200SLCCG3ADC | DS200TCDAH1BHD |
| DS200TCTGG1AFF | DS200TCEAG1BRE | DS200TCDAH1BHE |
| DS200EXPSG1ABB | DS200TCEAG1BSF | DS200DCFBG1BLC |
| DS200EXPSG1ACB | DS200TCEAG1BTF | DS200PTBAG1AEC |
| DS200QTBAG1ADC | DS200TCCAG1BAA | DS200DTBAG1AAA |
| DS200TBQBG1ACB | DS200DTBBG1ABB | DS200TCQCG1BKG |
| DS200TBQAG1ABB | DS200TCPSG1AME | DS200TCQAG1BHF-w01 |
| DS200RTBAG2AHC | DS200TCPSG1ARE | DS200SDCCG5AHD |
| DS200SDCCG1AEC | DS200GDPAG1ALF | DS200SLCCG3AGH |
Our Competitive Brands
- - ABB Advant-800xA,Advant OCS,Bailey Infi 90 and Net 90,H&B Freelance 2000,DSQC Robots,IGCT / IGBT
- - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
- - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
- - Bently Nevada 3300 System, 3500 System
- - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
- - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
- - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider
Question 1: Is Our Price Competitive?
NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.
Question 2: What Is The Warranty Period?
We offer a standard one-year warranty for all new and original items.
Question 3: What Payment Methods Do We Accept?
We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.
Question 4: What Shipping Methods Do We Use?
We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.
Question 5: What Is Our Delivery Time?
Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.
Question 6: How Do We Package The Goods?
Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.
Question 7: How Can Customers Contact Us And Request A Quote?
Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.