IS200EPCTG1AZZ GE EX2100 Exciter PT/CT Terminal Board

Product Description

The GE IS200EPCTG1AZZ, based on the IS200EPCTG1A Exciter PT/CT Terminal Board, processes generator potential transformer (PT) voltage and current transformer (CT) signals within the EX2100 Excitation Control System. The board provides input connections and signal conditioning for generator electrical measurements. The supplied suffix configuration is identified as Zaz, but its exact ordering-code definition requires manufacturer documentation.

Hardware Specifications

Generator Signal Conditioning and Control Interface

The EPCT board provides terminal connections for generator PT and CT measurement circuits. The supplied description identifies isolation transformers T1 through T6 for signal conditioning. These circuits support the transfer of electrical measurements to downstream excitation control hardware.

GE EX2100 hardware configuration determines the applicable measurement connections and controller interfaces. Verify the board schematic and terminal assignments before connecting field wiring.

The following checks apply to this industrial control hardware:

• Signal compatibility: Confirm PT secondary voltage and CT secondary current ratings against the board documentation.
• Input configuration: Verify the JP1 position and the selected analog input signal type before energizing the circuit.
• Measurement isolation: Confirm the isolation boundaries and grounding requirements from the board schematic.
• Diagnostics: Use TP1-TP8 only after confirming their functions and reference points in the applicable GE documentation.

Frequently Asked Questions

Q: Which excitation control platform uses the IS200EPCTG1AZZ?

A: The supplied product information identifies the board with the GE EX2100 Excitation Control System. Confirm the exact hardware revision and system compatibility against the equipment bill of materials.

Q: What PT and CT signals does this board support?

A: The supplied description lists 115 V RMS PT inputs at 50/60 Hz and CT inputs rated for 1 A or 5 A. Verify the terminal assignments and electrical ratings against the applicable board schematic before installation.

Q: Can the board operate in a triple modular redundant configuration?

A: The supplied description mentions simplex and TMR arrangements. Confirm that the specific IS200EPCTG1AZZ revision supports the intended configuration and that the associated control hardware and wiring match the approved system design.

Field Installation Guidelines

1. Isolate the excitation system and follow the site's lockout/tagout procedure before handling the board.
2. Verify the complete part number, board revision, connector layout, and terminal assignments against the equipment documentation.
3. Confirm PT and CT secondary ratings before connecting measurement circuits. Never open an energized CT secondary circuit.
4. Route PT/CT measurement wiring separately from high-current power conductors where the cabinet design permits.
5. Apply shielding and grounding according to the GE installation drawings. Avoid creating unintended ground loops.
6. Inspect connectors, terminal blocks, and board mounting points for damage before installation.
7. Verify input configuration and wiring continuity before restoring power. Perform functional checks according to the approved commissioning procedure.

Other Attributes

• Series: GE Multilin 350 Feeder
• Country of Origin: USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of The GE General Electric Mark VI 

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

 TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.