Honeywell 9602-0205 Satellite XT 4-20 mA/R Gas Detection Transmitter

Product Description

Configured for analog gas concentration transmission and relay-based alarm signaling, the Honeywell 9602-0205 (Satellite XT 4-20 mA/R Gas Detection Transmitter) provides a 4-20 mA interface, three SPST relay contacts, local display, and membrane-keypad operation. The unit operates from 12 to 24 VDC and supports shielded field wiring.

Hardware Specifications

4-20 mA Signal and Relay Interface

The 9602-0205 uses a 4-20 mA analog interface for transmitting the measured gas concentration to an external control system. The signal also provides defined current ranges for warning, maintenance, and fault conditions.

The warning signal operates at 2.8-4 mA with a 0.1 Hz modulation frequency. The maintenance signal operates at 2.4-4 mA with a 1 Hz modulation frequency. A 0-2 mA range indicates a fault condition.

In addition, the 4-20 mA/R configuration provides three SPST relay outputs. Each relay contact is rated for up to 250 VAC or 30 VDC at 2 A. The analog interface uses a 3-wire shielded cable, while the relay interface uses a 6-wire shielded cable.

Frequently Asked Questions

Q: What power supply does the 9602-0205 require?
A: The instrument operates from a 12 to 24 VDC supply and has a maximum power consumption of 1.8 W.

Q: What signal does the 9602-0205 provide to an external control system?
A: It provides a 4-20 mA analog output. The specified warning, maintenance, and fault ranges use distinct current levels and modulation frequencies.

Q: What are the relay contact limits?
A: The unit provides three SPST relay outputs. Each contact has a maximum rating of 250 VAC or 30 VDC at 2 A.

Field Installation Guidelines

Mount the instrument using the supplied mounting plate and maintain clear access to the display, keypad, wiring, and sensor assembly.

Use the specified 3-wire shielded cable for the analog interface and the specified 6-wire shielded cable for the relay interface. Keep analog signal wiring separated from high-voltage power wiring and other high-noise conductors.

Terminate cable shields according to the installation design and applicable site grounding practice. Avoid routing signal cables alongside switching or motor power conductors where practical.

Before energizing the unit, verify the 12 to 24 VDC supply polarity and confirm that the external relay circuits remain within the stated contact ratings.

Check the housing protection requirement before installation. The standard protection class is IP 52, while IP 65 is available as an option. Verify that the installed configuration matches the required enclosure protection.

After wiring, verify the 4-20 mA loop behavior and confirm that the connected control system correctly interprets the normal, warning, maintenance, and fault signal ranges.

Other Attributes

• Series: Honeywell Experion PKS(C200,C300)
• Country of Origin:  USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of Honeywell

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.