330104-00-06-90-11-05 Bently Nevada 3300 XL 8 mm Proximity Probe
Техничке спецификације
Manufacturer: Bently Nevada
Condition：New with Original Package
Product Type: 3300 XL 8 mm Proximity Probes
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Подношењем захтева за ову ставку потврђујете да сте прегледали и прихватили наше Услове и одредбе . Имајте на уму да ће све трансакције бити обрађене ван мреже.
Питајте стручњака
Помозите нам да допремо до више људи! <стронг>Делите овај производ са својом мрежом и <стронг>покажите подршку!
Product Description
Configured for radial vibration and axial position measurement in Bently Nevada 3300 XL monitoring systems, the Bently Nevada 330104-00-06-90-11-05, also cataloged as the 330104 proximity probe, provides direct physical displacement sensing via eddy-current interaction with a conductive target surface.
Suffix Breakdown & Model Matrix
| Option | Definition |
|---|---|
| 330104 | 3300 XL 8 mm Proximity Probe, M10 x 1 thread, reverse mount |
| -00 | Unthreaded length 0.0 mm |
| -06 | Overall case length 60 mm |
| -90 | Total cable length 9.0 m |
| -11 | Miniature ClickLoc coaxial connector, fluid-resistant cable |
| -05 | Multiple agency approvals (ATEX, IECEx, CSA) |
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model Brand | Bently Nevada |
| Origin | United States |
| Dimensions | Probe diameter 8 mm, M10 x 1 thread |
| Operating Temp | Probe tip/cable: -51 degC to +177 degC; Connector: -51 degC to +125 degC |
| Power Consumption | Passive sensor, powered via external Proximitor Sensor |
| Linear Range | 2.0 mm (0.25 mm to 2.25 mm from probe face) |
| Scale Factor | 7.87 V/mm (200 mV/mil) with AISI 4140 steel target |
| Frequency Response | 0 Hz to 10 kHz |
| Case Material | 303 / 304 stainless steel |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Cable Type | 75 ohm coaxial, fluid-resistant |
Eddy-Current Probe Scaling and Gap Voltage Validation
The 330104 probe operates on eddy-current displacement sensing principles, where scale factor deviation is validated by measuring the gap voltage at installation. For AISI 4140 steel targets, nominal gap voltage approaches -10 VDC at mid-range position, ensuring accurate rotor dynamics analysis and minimizing cross-talk between adjacent probes in multi-channel TSI racks.
Frequently Asked Questions
Q: Can the probe be hot-swapped without system recalibration?
A: No. The probe must remain connected during system power-up to maintain scaling accuracy; recalibration is required if replaced while energized.
Q: What is the minimum bending radius for the coaxial cable?
A: Maintain a bend radius of at least 25 mm to prevent impedance changes that affect measurement linearity.
Q: Is the probe compatible with non-ferrous target materials?
A: Yes, but scale factor and linear range will differ; correction factors must be applied per the 3300 XL system manual.
Field Installation Guidelines
Install the probe using reverse-mount configuration within the bearing housing bracket. Ensure the probe tip is clean and free of oil film before gap setting. Torque the mounting threads to manufacturer-recommended values without over-tightening. Ground the shield of the coaxial cable at the Proximitor Sensor end only to avoid ground loops. Verify gap voltage with a calibrated voltmeter prior to final assembly.
Other Attribute
- Series: 3300 System
- Country of Origin: USA
- Lead Time: In Stock, 2 Working Days
In Stock Hot Items of The 3500 System
Our Competitive Brands
- - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
- - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
- - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
- - Bently Nevada 3300 System, 3500 System
- - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
- - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
- - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider
TEL: +86 18030205725 E-MAIL: manskiwong@cambia.cn
Question 1: Is Our Price Competitive?
NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.
Question 2: What Is The Warranty Period?
We offer a standard one-year warranty for all new and original items.
Question 3: What Payment Methods Do We Accept?
We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.
Question 4: What Shipping Methods Do We Use?
We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.
Question 5: What Is Our Delivery Time?
Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.
Question 6: How Do We Package The Goods?
Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.
Question 7: How Can Customers Contact Us And Request A Quote?
Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.