TK-OAV061 Honeywell Analog Output Module

Product Description

The Honeywell TK-OAV061, associated with the OAV061 analog output designation, is described as a six-channel voltage output module for industrial process control. It provides analog output signals for external control devices. The available information identifies TC-OAV061 as an associated board-level part number; exact hardware compatibility and electrical characteristics require verification against the installed system documentation.

Hardware Specifications

Analog Output Signal Characteristics

An analog output module converts controller commands into electrical signals for external devices. For the TK-OAV061, the supplied description identifies voltage output and six output channels, but does not establish the individual channel ranges, output drive capability, or accuracy.

Before connecting field equipment, verify the following parameters against the applicable Honeywell hardware manual:

• Permitted output voltage range and polarity.
• Maximum output current and supported load impedance.
• Channel-to-channel and channel-to-system isolation ratings.
• Output resolution, accuracy, and settling time.
• Terminal assignments, grounding requirements, and controller compatibility.

Do not assume that the module supports 4-20 mA current loops or HART communication. The supplied information describes voltage outputs and does not confirm either capability.

Frequently Asked Questions

Q: How many analog output channels does the TK-OAV061 provide?

A: The supplied description specifies six output channels. Confirm the channel configuration against the module nameplate and its hardware documentation before commissioning.

Q: Can the TK-OAV061 drive a 10 V analog input directly?

A: The description associates the module with 10 V applications, but it does not establish the exact output range or load capacity. Verify voltage limits, polarity, and input impedance before connecting the receiving device.

Q: Is the TK-OAV061 compatible with Honeywell Experion PKS C200 and C200E controllers?

A: The supplied description associates the module with these platforms, but does not establish exact compatibility. Confirm the approved controller, I/O interface, firmware requirements, and mounting arrangement using the relevant Honeywell documentation.

Field Installation Guidelines

1. Confirm the complete model number and board assembly identifier against the installed hardware documentation.
2. Isolate the relevant power sources and follow site lockout procedures before removing or installing the module.
3. Verify the terminal assignments and output polarity before connecting field wiring.
4. Route analog signal cables separately from high-current power conductors and switching circuits where practical.
5. Apply cable shielding and grounding according to the manufacturer's installation instructions and the plant grounding scheme.
6. Check the receiving device's input range and impedance against the module's verified output specifications.
7. Perform channel-by-channel signal checks before enabling automatic control.
8. Do not assume hot-swap capability, redundant operation, or specific environmental ratings without documented confirmation.

Other Attributes

• Series: Honeywell Experion PKS(C200,C300)
• Country of Origin:  USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of Honeywell

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.