TC-FCCN01 ControlNet Gateway | Honeywell

Product Description

The Honeywell TC-FCCN01 is a ControlNet Gateway designed to support communication between the ControlNet network and an I/O system with a capacity of up to 8 modules. It operates from a nominal 24 VDC supply and supports a communication rate of 5 Mbit/s. This model uses non-redundant ControlNet media, so network architecture and power supply requirements must be verified before installation.

Hardware Specifications

ControlNet Communication and I/O Capacity

The TC-FCCN01 supports ControlNet communication at 5 Mbit/s and accommodates up to 8 I/O modules. Its non-redundant media configuration does not support redundant ControlNet cabling. Therefore, confirm that the intended network architecture uses a compatible non-redundant configuration.

The Comm A and I/O Status indicators provide red and green status indications for communication and I/O operation. These indicators help maintenance personnel check operating conditions when troubleshooting network communication or I/O-related issues.

Power Supply and Electrical Requirements

The gateway uses a nominal 24 VDC external power supply, with an allowable input range of 19.2-31.2 VDC, including 5% AC ripple. Maximum external supply current is 400 mA. The Flexbus output supports up to 640 mA at 5 VDC.

To comply with the stated CE Low Voltage Directive requirements, the original specification requires a Safety Extra Low Voltage (SELV) or Protected Extra Low Voltage (PELV) power supply. The specified 500 VAC isolation applies between user power and Flexbus. Check the supply rating, conductor size, and terminal tightening torque against the installation requirements.

Cabling and Environmental Conditions

The specified network cable is Belden RG-6/U quad-shield cable. Power conductors must be copper, stranded or solid, with a maximum specified stranded wire size of 12 AWG (4 mm2). The maximum stated insulation thickness is 1.2 mm, and connector screw torque must be maintained at 7-9 in-lb.

The operating temperature range is 0 to 55 deg C, while the storage temperature range is -40 to 85 deg C. Relative humidity must remain at 5-95%, non-condensing. The specified vibration test is 5 g at 10-500 Hz according to IEC 68-2-6. The shock specification lists 30 g peak acceleration with an 11 +/- 1 ms pulse width; a separate 50 g peak acceleration value is also present in the supplied data, but its test condition is not clearly identified.

Frequently Asked Questions

Q: Does the Honeywell TC-FCCN01 support redundant ControlNet networks?

A: No. The specified configuration supports non-redundant ControlNet media and does not support redundant ControlNet cabling.

Q: What power supply is required for the TC-FCCN01?

A: The gateway requires a nominal 24 VDC supply within the specified range of 19.2-31.2 VDC. A SELV or PELV power supply is required by the supplied specification for compliance with CE Low Voltage Directive requirements.

Q: Can the RJ-45 NAP be used for programming?

A: The module includes one RJ-45 Network Access Port. Although the specification mentions a ControlNet programming cable such as the 1786-CP, it explicitly marks this use as not supported. Confirm the supported connection method before planning programming or maintenance access.

Other Attributes

• Series: Honeywell Experion PKS(C200,C300)
• Country of Origin:  USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of Honeywell

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.