GE IS215UCCAM03A Mark VIe Compact PCI Processor Module

SKU: IS215UCCAM03A

Technické špecifikácie

  • Manufacturer: GE General Electric

  • Condition:New with Original Package

  • Product Type: Compact PCI Processor Modules

  • Country of Origin: USA

  • Payment:T/T, Western Union

  • Shipping port: Xiamen

  • Warranty: 12 months

Odoslaním žiadosti o túto položku potvrdzujete, že ste si prečítali a prijali naše Podmienky a pravidlá. Upozorňujeme, že všetky transakcie budú spracované offline.

100% originálny a autentický
100% úplne nový, pripravený na odoslanie
Vrátenie platby za podporu, služba 7x24 hodín
1-ročná záruka na všetky produkty

Opýtajte sa odborníka

Pomôžte nám osloviť viac ľudí! Zdieľajte tento produkt so svojou sieťou a prejavte svoju podporu!

GEProduct Description

The IS215UCCAM03A is a Compact PCI (CPCI) processor module manufactured by General Electric (GE) for the Mark VIe control system. It serves as the processing unit of a UCCA controller, executing control logic and managing communication between the controller, I/O networks, operator interfaces, and engineering tools. The module uses an Intel Celeron processor, runs QNX Neutrino, and supports multiple Ethernet communication interfaces.

Processor Architecture and Memory

The IS215UCCAM03A is a single-slot CPCI processor assembly based on the IS215UCCAH3 processor board and IS200EPMC interface board. It uses an Intel Ultra Low Voltage Celeron processor running at 650 MHz to execute controller applications.

Furthermore, the assembly provides 128 MB of DDR SDRAM and 128 MB of CompactFlash memory. The processor also includes flash-backed SRAM, with 8 KB allocated as non-volatile memory for controller functions. A watchdog timer monitors processor operation.

Communication Interfaces

The module provides Ethernet and serial communication interfaces for controller setup and system data exchange.

  • Primary UDH Ethernet: Provides a 10BaseT/100BaseTX connection through an RJ-45 port for communication with HMIs, engineering tools, and other control equipment.
  • IONet Ethernet: Three Ethernet ports on the EPMC interface support communication between controllers and I/O packs.
  • Serial Communication: A COM1 RS-232C port supports initial controller setup.

Meanwhile, the Ethernet interfaces support TCP/IP communication. The primary interface also supports EGD communication with CIMPLICITY HMI and Ethernet Modbus communication with third-party DCS equipment.

Operating System and Programming

The IS215UCCAM03A runs the QNX Neutrino operating system. Its controller programming environment supports control block logic with analog and discrete function blocks. Boolean logic uses relay ladder diagram representation.

Supported data types include Boolean, 16-bit signed and unsigned integers, 32-bit signed and unsigned integers, 32-bit floating-point values, and 64-bit long floating-point values.

Technical Specifications

Parameter Specification
Model IS215UCCAM03A
Brand General Electric (GE)
Series Mark VIe
Product Type Compact PCI Processor Module
Functional Acronym UCCA
Processor Board IS215UCCAH3
Interface Board IS200EPMC
Microprocessor Intel Ultra Low Voltage Celeron
Processor Speed 650 MHz
Operating System QNX Neutrino
Memory 128 MB DDR SDRAM
CompactFlash Memory 128 MB
Flash-Backed SRAM 8 KB allocated as NVRAM
L2 Cache 256 KB
Programming Control Block Language and Relay Ladder Diagram
Supported Data Types Boolean, 16-bit signed/unsigned integer, 32-bit signed/unsigned integer, 32-bit floating point, 64-bit long floating point
Primary Ethernet Interface 10BaseT/100BaseTX
Ethernet Connector RJ-45
IONet Interfaces 3 Ethernet ports
Serial Interface RS-232C, COM1
Watchdog Timer Yes
PMC Sites 2
Operating Temperature 0 to 60 deg C
Country of Origin United States
Shipment From Xiamen, China
Repair Lead Time 3-7 days
Availability In Stock
Manual GEH-6721L

Installation and Controller Configuration

The IS215UCCAM03A operates as part of a CompactPCI controller rack. The GE UCCx controller architecture supports a four-slot CPCI rack with one or two power supplies.

The primary controller occupies the leftmost position (Slot 1). Furthermore, when multiple controllers share the rack, removing the system controller from Slot 1 causes the remaining controllers in that rack to stop operating.

The module also uses a CMOS battery to retain configuration settings and the internal real-time clock. Check the battery-enable jumper position during installation, as the battery may be disconnected during storage.

Frequently Asked Questions

Q: What processor does the GE IS215UCCAM03A use?

A: The IS215UCCAM03A uses an Intel Ultra Low Voltage Celeron processor operating at 650 MHz. It runs the QNX Neutrino operating system.

Q: What communication interfaces are available on the IS215UCCAM03A?

A: The module provides one primary 10BaseT/100BaseTX UDH Ethernet port, three IONet Ethernet ports, and one RS-232C COM1 port for initial controller setup.

Q: What memory configuration does the IS215UCCAM03A have?

A: The assembly includes 128 MB of DDR SDRAM and 128 MB of CompactFlash memory. It also provides 8 KB of flash-backed SRAM allocated as NVRAM for controller functions.

Q: Which manual covers the IS215UCCAM03A?

A: Refer to GE manual GEH-6721L, Mark VIe Controllers (UCCx and UCSx) System Guide, for hardware specifications and controller configuration information.

GEOther Attributes

  • Series: Mark VI IS200
  • Country of Origin: USA
  • Lead Time: In Stock, 2 Working Days

 

In Stock Hot Items of The GE Speedtronic Mark V

DS200TCQAG1BFD DS200SLCCG3AFG DS200TCCBG1BED
DS200TCQCG1BHF DS200SLCCG1AHH DS200TCCBG3ANE
DS200TCQCG1BGK DS200SLCCG1ACC DS200PCCAG2ACB
DS200TCRAG1ACC DS200SLCCG3ADC DS200TCDAH1BHD
DS200TCTGG1AFF DS200TCEAG1BRE DS200TCDAH1BHE
DS200EXPSG1ABB DS200TCEAG1BSF DS200DCFBG1BLC
DS200EXPSG1ACB DS200TCEAG1BTF DS200PTBAG1AEC
DS200QTBAG1ADC DS200TCCAG1BAA DS200DTBAG1AAA
DS200TBQBG1ACB DS200DTBBG1ABB DS200TCQCG1BKG
DS200TBQAG1ABB DS200TCPSG1AME DS200TCQAG1BHF-w01
DS200RTBAG2AHC DS200TCPSG1ARE DS200SDCCG5AHD
DS200SDCCG1AEC DS200GDPAG1ALF DS200SLCCG3AGH


Our Competitive Brands

  • - ABB Advant-800xA,Advant OCS,Bailey Infi 90 and Net 90,H&B Freelance 2000,DSQC Robots,IGCT / IGBT
  • - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
  • - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
  • - Bently Nevada 3300 System, 3500 System
  • - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
  • - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
  • - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.