GE Fanuc Emerson IC694PWR321 RX3i PacSystem Power Supply Module

Product Description

Configured for AC or DC control-system power conversion in the RX3i PacSystem, the GE Fanuc Emerson IC694PWR321 (IC694PWR321 Power Supply Module) accepts 120/240 VAC or 125 VDC nominal input and provides 5 VDC, isolated +24 VDC, and relay +24 VDC outputs.

Hardware Specifications

PLC Power Architecture

The IC694PWR321 accepts either AC or DC input within the specified ranges. Internally, the module provides separate output rails for the 5 VDC supply, isolated +24 VDC supply, and relay +24 VDC supply.

The 5 VDC output is specified at 5.0-5.2 VDC with a maximum output power of 15 W. In addition, the isolated +24 VDC output provides 21.5-28 VDC and up to 20 W. The relay supply provides 24-28 VDC with a maximum output power of 15 W.

The input circuit provides 1500 VAC isolation for one minute. A minimum 20 ms ride-through time supports continuity during short input disturbances. Two 2 A input fuses provide input-side protection.

Frequently Asked Questions

Q: What input voltages does the IC694PWR321 support?
A: The module accepts 85-264 VAC or 100-300 VDC. The nominal input ratings are 120/240 VAC and 125 VDC.

Q: What output rails are provided by the IC694PWR321?
A: The module provides 5 VDC, isolated +24 VDC, and relay +24 VDC outputs. Their specified voltage ranges and maximum output powers are listed in the hardware specifications.

Q: Does the IC694PWR321 provide input isolation?
A: Yes. The supplied specification lists 1500 VAC input isolation for one minute.

Field Installation Guidelines

Install the module according to the RX3i PacSystem hardware installation requirements. Confirm that the available supply voltage falls within the specified AC or DC input range before energizing the module.

Route incoming power wiring separately from low-level analog and communication wiring where practical. Maintain secure terminal connections and provide protective grounding in accordance with the applicable control-panel electrical standard.

Before startup, verify input polarity for DC operation and confirm the installed input protection. Check the 5 VDC, isolated +24 VDC, and relay +24 VDC output circuits against their connected loads. Do not exceed the specified output power limits.

The supplied data does not specify dimensions, operating temperature, power consumption, or mounting details. These parameters should therefore be confirmed from the applicable GE Fanuc Emerson hardware documentation before panel layout or environmental qualification.

Other Attributes

• Series: GE Multilin 350 Feeder
• Country of Origin: USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of The GE General Electric Mark VI 

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

 TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.