MX213 MX200 | Bachmann Processor Module

Product Description

Configured for real-time control and data handling in the Bachmann MX200 automation system, the Bachmann MX213/CF 4GB (MX213 processor module) executes application processing while providing onboard CF mass storage and industrial communication interfaces.

Hardware Specifications

Industrial Control and Communication Architecture

The MX213 provides processor execution and local data storage within the MX200 modular control architecture. Its LX700 processor operates at 266 MHz, while 256 MB of DRAM supports application and runtime data processing.

The two 100 Mbps Ethernet interfaces provide network connectivity for control-system communication. In addition, the CAN/CANopen interface supports field-level device communication, while the RS232 interface provides a serial connection for compatible equipment.

The 4 GB CompactFlash card provides removable mass storage for supported system data. The module also includes 512 kB of non-volatile RAM, which retains data without continuous power.

Because the supplied specifications do not define exact Ethernet protocol profiles, backplane communication rates, or firmware compatibility ranges, these parameters should be verified against the applicable Bachmann MX200 system documentation before integration.

Frequently Asked Questions

Q: Does the MX213/CF 4GB include CompactFlash storage?
A: Yes. The specified configuration includes a 4 GB CompactFlash card.

Q: Which communication interfaces are available on the MX213/CF 4GB?
A: The supplied data specifies two 100 Mbps Ethernet ports, one CAN/CANopen interface, and one RS232 serial interface.

Q: Can the MX213/CF 4GB be hot-swapped during operation?
A: The supplied information does not specify hot-swap support. The module should therefore be installed or removed only according to the applicable MX200 system procedure.

Field Installation Guidelines

Install the MX213 in the designated MX200 mounting position and secure the module according to the system hardware procedure. Before insertion, isolate power when the system documentation does not explicitly permit energized module replacement.

Route Ethernet, CAN, and RS232 cables separately from high-current switching conductors where practical. Maintain appropriate cable separation to reduce electromagnetic coupling.

Terminate cable shields and protective bonding connections according to the control cabinet grounding design. Avoid creating unintended ground loops through communication cable shields.

Verify connector orientation and mechanical engagement before energizing the system. After installation, confirm Ethernet, CAN/CANopen, and RS232 connections according to the configured application.

Use only firmware, CompactFlash media, and system software versions documented as compatible with the installed MX200 hardware configuration.

Other Attributes

• Country of Origin:  Austria
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of Bachmann

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.