KJ4010X1-BC1 Emerson DeltaV Spare Fuse Package

Product Description

Configured for per-channel overcurrent protection in DeltaV Electronic Marshalling, the Emerson KJ4010X1-BC1 (KJ4010X1 Spare Fuse Package) provides direct physical execution of short-circuit isolation at CHARM I/O terminal blocks.

Hardware Specifications

Channel-to-Channel Isolation

The fused terminal assembly enforces channel-to-channel isolation within the Electronic Marshalling cabinet. Each fuse carrier interrupts overcurrent faults on a single CHARM terminal without disturbing adjacent channels. This isolation boundary maintains signal integrity across the I/O panel. Furthermore, the 30 V basic insulation rating restricts energy transfer between field wiring circuits. Consequently, a short-circuit on one channel cannot propagate to neighboring terminals or to the CHARM I/O Card backplane.

Frequently Asked Questions

Q: Can the KJ4010X1-BC1 fuse be replaced while the DeltaV system is online?

A: Yes. The fuse sits at the field-termination edge only. Therefore, maintenance personnel can replace the fuse during a scheduled window without disturbing CIOC logic or communication paths. However, the associated field loop must be de-energized before fuse extraction.

Q: What is the correct terminal block order code for this fuse package?

A: The KJ4010X1-BC1 plugs into Emerson fused-terminal-block assemblies designed for DeltaV CHARM I/O carriers. Consult the DeltaV Electronic Marshalling ordering documentation for the exact carrier part number.

Q: Does this fuse support redundant CIOC configurations?

A: Yes. CHARM communications to the controller operate on fully redundant paths. The fuse provides protection only at the field-termination edge. Hence, a fuse failure does not affect redundant network switching or controller handoff.

Field Installation Guidelines

Install the fuse into the fuse-equipped DeltaV terminal block carrier mounted on the Electronic Marshalling panel. Verify that the 2-pin blade contacts seat fully into the holder. Next, tighten the terminal screws to the torque specified in the DeltaV installation manual. Route field wiring with proper separation from high-voltage cables to prevent inductive coupling. Connect shield drains to the designated ground bus bar at one end only. Finally, confirm that the panel environment stays within -20 to +70 deg C before energizing the loop.

Other Attributes

• Country of Origin: USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of Emerson DeltaV

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.