330101-01-12-10-02-05 Bently Nevada 3300 XL 8 mm Proximity Probe
Технические характеристики
Manufacturer: Bently Nevada
Condition：New with Original Package
Product Type: Proximity Probes
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Отправляя запрос на этот товар, вы подтверждаете, что ознакомлены и согласны с нашими Условиями и положениями. Обратите внимание, что все транзакции будут обрабатываться в оффлайне.
Спросите эксперта
Помогите нам охватить больше людей! Поделитесь этим продуктом со своими знакомыми и покажите свою поддержку!
Product Description
Configured for non-contact displacement measurement in the 3300 XL 8 mm Proximity Transducer System, the Bently Nevada 330101-01-12-10-02-05 (330101 3300 XL 8 mm Proximity Probe) converts the distance between the probe tip and a conductive target into a proportional electrical output for vibration, position, Keyphasor, and speed measurements.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 330101-01-12-10-02-05 |
| Base Model | 330101 |
| Brand | Bently Nevada |
| Product Type | 3300 XL 8 mm Proximity Probe |
| Series | 3300 XL 8 mm Proximity Transducer System |
| Dimensions | 120 mm case length; 1.0 m total length |
| Operating Temp | -35 deg C to +177 deg C |
| Power Consumption | Not specified; probe operates as part of the associated transducer system |
| Linear Sensing Range | 2.0 mm (80 mils) |
| Typical Linear Range Position | 0.25 mm to 2.29 mm from target |
| Incremental Scale Factor | 7.87 V/mm (200 mV/mil), +/- 6.5% |
| Frequency Response | 0 to 6.5 kHz (+0, -3 dB) |
| Maximum Field Wiring | Up to 305 m (1000 ft) |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 304 stainless steel |
| Connector | Corrosion-resistant, gold-plated brass ClickLoc connector |
| Tensile Strength | 330 N (75 lbf) from probe case to probe lead |
| Approvals | CSA, ATEX, IECEx |
Eddy-Current Probe Scaling and Gap Voltage
The 330101-01-12-10-02-05 uses eddy-current sensing to detect the relative position of a conductive machine target without mechanical contact. The probe generates an electrical response that varies with the probe-to-target distance.
The specified incremental scale factor is 7.87 V/mm (200 mV/mil), with a tolerance of +/- 6.5%. The 2.0 mm (80 mil) linear sensing range supports dynamic displacement and static position measurements. The probe can therefore provide input to monitoring channels that evaluate shaft vibration or axial/radial position.
The associated transducer system requires correct probe gap adjustment and electrical validation. Installation should maintain the specified mechanical relationship between the probe tip and conductive target throughout machine operation.
Frequently Asked Questions
Q: What sensing principle does the 330101-01-12-10-02-05 use?
A: It uses non-contact eddy-current sensing to measure the distance between the probe tip and a conductive target.
Q: What is the specified linear sensing range?
A: The specified linear sensing range is 2.0 mm (80 mils), with the typical measurement position extending from 0.25 mm to 2.29 mm from the target.
Q: What connector does this probe use?
A: The supplied specification identifies a corrosion-resistant, gold-plated brass ClickLoc connector. The model description also specifies a miniature coaxial ClickLoc connector with a connector protector.
Field Installation Guidelines
- Mount the probe so that its sensing axis remains aligned with the intended conductive target.
- Adjust the probe gap according to the associated 3300 XL transducer system installation requirements.
- Keep the probe cable away from high-current power conductors and other sources of electrical interference.
- Maintain appropriate shielding and grounding practices for the connected transducer circuit.
- Protect the ClickLoc connector from mechanical loading, contamination, and moisture during installation.
- Do not exceed the specified 330 N (75 lbf) tensile load between the probe case and probe lead.
- Verify the probe output and gap condition before placing the monitoring channel into service.
- For hazardous-area installations, verify that the installed configuration matches the applicable CSA, ATEX, and IECEx certification requirements.
Other Attributes
- Series: 24765 and 135613 Case Expansion Transducer Systems
- Country of Origin: USA
- Lead Time: In Stock, 2 Working Days
In Stock Hot Items of The Bently Nevada
Our Competitive Brands
- - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
- - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
- - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
- - Bently Nevada 3300 System, 3500 System
- - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
- - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
- - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider
TEL: +86 18030205725 E-MAIL: manskiwong@cambia.cn
Question 1: Is Our Price Competitive?
NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.
Question 2: What Is The Warranty Period?
We offer a standard one-year warranty for all new and original items.
Question 3: What Payment Methods Do We Accept?
We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.
Question 4: What Shipping Methods Do We Use?
We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.
Question 5: What Is Our Delivery Time?
Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.
Question 6: How Do We Package The Goods?
Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.
Question 7: How Can Customers Contact Us And Request A Quote?
Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.