Bently Nevada 330130-085-03-05 3300 XL Standard Extension Cable

The Bently Nevada 330130-085-03-05 is a 3300 XL Standard Extension Cable for connecting a compatible proximity probe to its Proximitor Sensor. The 8.5 m cable features an armored construction with connector protectors. Its electrical characteristics and length form part of the proximity measurement chain, so the cable must match the probe and sensor configuration to maintain the specified system calibration.

Technical Specifications

Cable Configuration and Measurement Chain

The extension cable carries the proximity probe signal to the Proximitor Sensor. Its electrical properties, together with the probe lead and sensor, affect the calibrated measurement system. Therefore, confirm the required total cable length and approved component combination rather than selecting the extension cable based only on the physical distance between components.

The model suffix identifies the stated ordering options:

• 085: 8.5 m extension cable length.
• 03: Armored cable with connector protectors.
• 05: Multiple agency approval option.

Verify the complete model number against the equipment configuration and the documentation supplied with the cable before ordering or replacement.

Installation and Handling Considerations

Maintain the specified minimum bend radius of 25.4 mm when routing the cable. The armored construction and connector protectors provide the stated physical configuration, but installers should still avoid excessive bending or mechanical stress at the connectors.

The ClickLoc connectors use finger-tight engagement. The supplied maximum connector torque is 0.565 N m; confirm the applicable connector instructions before applying any additional torque. Check the cable's length, connector condition and component compatibility before returning the proximity measurement channel to service.

Frequently Asked Questions

Q: Which components does the 330130-085-03-05 connect?

A: It connects a compatible proximity probe to its Proximitor Sensor. Confirm that the probe, extension cable and sensor form an approved measurement chain with the required total cable length.

Q: What do the suffixes 085-03-05 indicate?

A: The supplied configuration identifies an 8.5 m cable, armored construction with connector protectors, and a multiple-approval option. Verify the exact approval markings and certificates on the delivered unit.

Q: Can this cable replace another 3300 XL extension cable?

A: Not based on cable length or series name alone. Check the complete part numbers, connector configuration, electrical characteristics and measurement-chain requirements before substitution.