330104-00-09-10-12-05 | Bently Nevada | 3300 XL 8 mm Proximity Probe

Bently Nevada 330104-00-09-10-12-05 3300 XL 8 mm Proximity Probe

Configured for non-contact shaft displacement measurement in the 3300 XL transducer system, the Bently Nevada 330104-00-09-10-12-05 (330104 3300 XL 8 mm Proximity Probe) provides eddy-current measurement of shaft relative vibration, axial position, and rotational behavior.

Suffix Breakdown & Model Matrix

Hardware Specifications

Eddy-Current Scaling and Signal Characteristics

The 330104 probe uses an eddy-current sensing principle to measure the distance between the probe tip and a conductive shaft target. The specified nominal scale factor is 7.87 V/mm (200 mV/mil) when the probe operates with a standard 3300 XL Proximitor sensor.

The 2.0 mm (80 mils) linear range supports shaft displacement measurement within the specified operating region. Therefore, installation must maintain the probe-to-target gap within the applicable measurement range.

The FluidLoc cable construction limits oil and fluid migration along the cable path. In addition, the ClickLoc connector provides the specified probe-to-cable interface.

For rotor dynamics applications, the probe output represents shaft motion relative to the stationary probe position. Consequently, probe orientation, target geometry, gap setting, and cable routing affect the resulting vibration measurement.

The probe assembly also supports cross-talk control through the defined probe, cable, and Proximitor configuration. Install adjacent measurement channels with appropriate physical separation and follow the applicable 3300 XL system wiring practices.

Frequently Asked Questions

Q: What measurement principle does the 330104-00-09-10-12-05 use?
A: It uses eddy-current sensing for non-contact measurement of shaft displacement. The system can process this signal for relative vibration, axial position, and rotational measurements.

Q: What scale factor applies to this probe?
A: The nominal scale factor is 7.87 V/mm (200 mV/mil) when paired with a standard 3300 XL Proximitor sensor.

Q: What environmental approvals are specified for this configuration?
A: The supplied configuration includes CSA, ATEX, and IECEx approvals. Installation must match the applicable hazardous-area requirements for the complete transducer system.

Field Installation Guidelines

• Install the M10 x 1 threaded probe securely in the designated machinery mounting position.
• Set the probe gap according to the applicable 3300 XL installation and calibration procedure.
• Verify the conductive shaft target provides the required sensing surface and clearance.
• Route the FluidLoc cable away from mechanical abrasion, excessive bending, and sources of electrical interference.
• Keep probe signal cabling separated from high-current power wiring where practical.
• Maintain connector cleanliness during installation and ensure the ClickLoc connection is fully engaged.
• Verify probe polarity, cable termination, and Proximitor compatibility before commissioning.
• For hazardous-area installations, verify the complete probe, cable, connector, and associated monitoring equipment against the applicable CSA, ATEX, and IECEx installation requirements.
• Confirm the measured gap and electrical output before placing the machinery protection channel into service.
• Do not infer probe condition from vibration data alone; inspect mounting, cabling, connectors, and target geometry when abnormal readings occur.

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.