TK-CCR013 Honeywell Redundant Network Interface Module

Product Description

The Honeywell TK-CCR013, identified by the base model TK-CCR013, is described as a Redundant Network Interface Module for industrial control network communication. The supplied information associates this module with redundant communication paths in a distributed control system (DCS). However, the exact network protocol, interface configuration, supported chassis, and failover performance require confirmation from the applicable Honeywell hardware documentation.

Hardware Specifications

DCS Network Redundancy and Communication

Network redundancy can maintain communication availability when a supported network path fails. However, the actual behavior depends on the controller architecture, network topology, interface configuration, and redundancy management mechanism.

Before integrating the TK-CCR013, verify the supported network protocol, port configuration, communication partner requirements, and failover behavior against the applicable Honeywell system documentation. Do not assume compatibility with Series C hardware based on the model designation alone.

Frequently Asked Questions (FAQ)

Q: Does the TK-CCR013 support automatic network failover?

A: The supplied description identifies a redundant network interface architecture, but it does not establish the exact failover mechanism, switching time, or fault-detection criteria. Confirm these parameters in the applicable system manual.

Q: Is the TK-CCR013 compatible with firmware revision D05.36?

A: Firmware revision D05.36 is listed in the supplied information as a reference. Confirm hardware revision compatibility, controller firmware requirements, and configuration software support before installation or replacement.

Q: Can the TK-CCR013 operate with dual power supplies?

A: The supplied description mentions possible redundant power paths at the system chassis level. It does not confirm the module's individual power inputs or power consumption. Check the chassis power distribution documentation before connecting or replacing the module.

Field Installation Guidelines

1. Verify identification: Check the module label, full part number, hardware revision, and associated system documentation before installation.
2. Confirm compatibility: Verify the supported chassis, controller platform, network protocol, and firmware combination.
3. Inspect network connections: Check connector condition, cable type, port assignments, and network topology against the manufacturer's wiring documentation.
4. Maintain cable separation: Route communication cables separately from high-voltage and high-current conductors where practical to reduce electromagnetic interference.
5. Check grounding: Follow the chassis grounding and cable-shield termination instructions specified by Honeywell. Avoid unapproved shield connections.
6. Validate redundancy: After installation, test each supported communication path and verify fault alarms, recovery behavior, and controller communication status using the approved commissioning procedure.
7. Observe replacement procedures: Follow the system's approved shutdown or hot-swap procedure. Do not assume that the module supports live replacement.

Other Attributes

• Series: Honeywell Experion PKS(C200,C300)
• Country of Origin:  USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of Honeywell

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.