IS200VVIBH1C GE Mark VI Vibration Monitor Board
Spesifikasi teknikal
Manufacturer: GE General Electric
Condition:New with Original Package
Product Type: Vibration Monitor Boards
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Dengan menghantar permintaan untuk item ini, anda mengesahkan bahawa anda telah menyemak dan menerima Terma & Syarat kami. Sila ambil perhatian bahawa semua transaksi akan diproses secara luar talian.
Tanya pakar
Bantu kami menjangkau lebih ramai orang! Kongsi produk ini dengan rangkaian anda dan tunjukkan sokongan anda!
Product Description
The GE IS200VVIBH1C is a Vibration Monitor Board designed for the GE Mark VI turbine control system. It processes vibration probe signals received from TVIB or DVIB terminal boards, converts the acquired signals into digital data, and transfers the measurements to the controller through the VME bus. The board supports vibration monitoring using proximity, velocity, acceleration, seismic, and phase probes.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | IS200VVIBH1C |
| Brand | General Electric (GE) |
| Series | Mark VI |
| Product Type | Vibration Monitor Board |
| Functional Acronym | VVIB |
| Terminal Board Interface | TVIB / DVIB |
| Terminal Board Capacity | Up to 14 probes per terminal board |
| Terminal Board Connection | Up to 2 TVIB boards per VVIB processor board |
| Signal Conversion | Analog-to-Digital (A/D) |
| Controller Interface | VME bus |
| Supported Probe Types | Proximity, Velocity, Acceleration, Seismic, Phase |
| Probe Manufacturer | Bently Nevada |
| Proximity Probe Supply | -28 VDC |
| Individual Excitation Supply | -23 to -26 VDC |
| Excitation Protection | Short-circuit protected |
| Control Configurations | Simplex / TMR |
| Country of Manufacture | United States (USA) |
Vibration Signal Processing
The VVIB board receives analog vibration signals through the TVIB or DVIB terminal board. Each terminal board can accommodate up to 14 probe connections, while one VVIB processor board can connect to two TVIB boards.
Furthermore, the VVIB converts the incoming analog signals into digital measurements and transfers the data to the Mark VI controller through the VME bus. The controller uses these measurements to evaluate equipment vibration and position conditions.
The supported Bently Nevada probe types include:
- Proximity probes: Measure shaft displacement and radial vibration.
- Velocity probes: Measure vibration velocity.
- Acceleration probes: Measure vibration acceleration.
- Seismic probes: Monitor vibration through seismic sensing.
- Phase probes: Provide rotational reference information for phase-related measurements.
Probe Power Supply
The VVIB supplies -28 VDC to the terminal board for Proximitor probe operation. In TMR configurations, a diode high-select circuit selects the highest available -28 VDC supply bus to maintain the redundant probe power arrangement.
In addition, individual regulators provide excitation sources ranging from -23 to -26 VDC. These outputs feature short-circuit protection to protect the probe excitation circuits. The VVIB supports probe power arrangements in both simplex and TMR configurations.
Installation and Replacement
The IS200VVIBH1C installs in the Mark VI VME processor rack. Follow the specified installation sequence:
- Turn off power to the VME processor rack before installation.
- Slide the board into the rack and seat its edge connectors.
- Push the upper and lower insertion levers inward by hand.
- Tighten the captive screws at the top and bottom of the front panel.
Furthermore, verify the terminal board connections and rack configuration before returning the system to operation.
Frequently Asked Questions
Q: What is the main function of the IS200VVIBH1C?
A: It processes vibration probe signals from TVIB or DVIB terminal boards, converts analog measurements into digital data, and sends the results to the Mark VI controller through the VME bus.
Q: Which terminal boards connect to the IS200VVIBH1C?
A: The VVIB supports TVIB and DVIB terminal board interfaces. The supplied technical information specifies that up to two TVIB boards can connect to one VVIB processor board.
Q: Does the IS200VVIBH1C support TMR operation?
A: Yes. The VVIB supports both simplex and TMR configurations. In TMR systems, a diode high-select circuit manages the redundant -28 VDC probe power supply.
Q: What should be checked before replacing this board?
A: Check the complete part number, existing TVIB or DVIB terminal board arrangement, probe connections, and simplex or TMR configuration. Also, confirm the VME rack compatibility before installation.
Other Attributes
- Series: Mark VI IS200
- Country of Origin: USA
- Lead Time: In Stock, 2 Working Days
In Stock Hot Items of The GE Speedtronic Mark V
| DS200TCQAG1BFD | DS200SLCCG3AFG | DS200TCCBG1BED |
| DS200TCQCG1BHF | DS200SLCCG1AHH | DS200TCCBG3ANE |
| DS200TCQCG1BGK | DS200SLCCG1ACC | DS200PCCAG2ACB |
| DS200TCRAG1ACC | DS200SLCCG3ADC | DS200TCDAH1BHD |
| DS200TCTGG1AFF | DS200TCEAG1BRE | DS200TCDAH1BHE |
| DS200EXPSG1ABB | DS200TCEAG1BSF | DS200DCFBG1BLC |
| DS200EXPSG1ACB | DS200TCEAG1BTF | DS200PTBAG1AEC |
| DS200QTBAG1ADC | DS200TCCAG1BAA | DS200DTBAG1AAA |
| DS200TBQBG1ACB | DS200DTBBG1ABB | DS200TCQCG1BKG |
| DS200TBQAG1ABB | DS200TCPSG1AME | DS200TCQAG1BHF-w01 |
| DS200RTBAG2AHC | DS200TCPSG1ARE | DS200SDCCG5AHD |
| DS200SDCCG1AEC | DS200GDPAG1ALF | DS200SLCCG3AGH |
Our Competitive Brands
- - ABB Advant-800xA,Advant OCS,Bailey Infi 90 and Net 90,H&B Freelance 2000,DSQC Robots,IGCT / IGBT
- - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
- - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
- - Bently Nevada 3300 System, 3500 System
- - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
- - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
- - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider
Question 1: Is Our Price Competitive?
NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.
Question 2: What Is The Warranty Period?
We offer a standard one-year warranty for all new and original items.
Question 3: What Payment Methods Do We Accept?
We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.
Question 4: What Shipping Methods Do We Use?
We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.
Question 5: What Is Our Delivery Time?
Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.
Question 6: How Do We Package The Goods?
Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.
Question 7: How Can Customers Contact Us And Request A Quote?
Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.