Honeywell 51198651-100 SPS5785 HPM Power Supply Module

Product Description

The Honeywell 51198651-100 SPS5785 is an HPM power supply module that provides 24 VDC output for the Honeywell xPM system. It accepts a wide-range AC input and includes battery charging, Form-C alarm relay contacts, and LED status indicators. The module supports redundant power supply configurations with each supply connected to a dedicated power source.

Hardware Specifications

Power Output and Battery Charging

The module provides a regulated 24 VDC output for the xPM system, with a specified output tolerance of +/-1%. It also supplies a 6 VAC output and a 24-26 VDC battery-charging output. The input-to-output isolation rating is 3 kVAC.

The battery-charging function supports the associated backup power arrangement. Confirm the battery specifications and charging requirements against the installed system configuration before replacement.

Alarm Monitoring and Status Indicators

The 51198651-100 uses Form-C relay contacts for alarm signaling. According to the supplied product information, primary and secondary alarm contacts monitor power supply and backup-system conditions.

The listed alarm conditions include:

• DC output voltage outside normal limits.
• AC input power failure.
• Internal electronics overtemperature.
• Internal fan failure.
• Failure of the 48 V battery backup system.
• Battery charger failure.

Five LED indicators identify DC output, battery, fan/temperature, AC input, and charging status. These indicators help maintenance personnel distinguish between output, input, thermal, cooling, and battery-related conditions. The exact relay logic and contact assignments should be checked against the applicable wiring documentation.

Redundant Power Supply Configuration

The module supports redundant power supply arrangements in which each supply receives power from a dedicated source. This configuration separates the incoming power sources, while the system design determines how the supplies share or assume the load.

Before replacing a module, verify the installed power architecture, output requirements, alarm wiring, and battery backup arrangement. Do not assume that matching output voltage alone establishes full system compatibility.

Environmental Operating Conditions

The specified operating temperature range is -40 to +70 deg C, with a storage range of -50 to +85 deg C. The module also supports operation at 5-95% relative humidity without condensation.

These ratings describe the stated environmental limits. They do not independently establish enclosure protection, installation clearances, or suitability for a particular site.

Frequently Asked Questions

Q: What is the main function of the Honeywell 51198651-100?

A: It supplies 24 VDC power to the Honeywell xPM system and provides additional AC output, battery-charging output, status indication, and alarm relay functions.

Q: What alarm conditions does the 51198651-100 monitor?

A: The supplied information lists abnormal DC output voltage, AC input failure, internal overtemperature, fan failure, 48 V battery backup failure, and battery charger failure. Confirm the precise relay behavior and contact assignments using the applicable wiring documentation.

Q: Can the 51198651-100 operate in a redundant power supply configuration?

A: Yes. The supplied information specifies redundant configurations with each power supply fed by a dedicated power source. Verify the system's power distribution and redundancy requirements before installation.

Other Attributes

• Series: Honeywell Experion PKS(C200,C300)
• Country of Origin:  USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of Honeywell

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.