CC-PAOH01 51405039-176 | HART Analog Output Module | Honeywell

Product Description

The Honeywell CC-PAOH01, also cataloged as the 51405038-175 Analog Input Module / HART Analog Output Module, operates as a dedicated hardware component for high-level analog signal conversion and field device telemetry within Experion PKS Series C control system networks.

Hardware Specifications

4-20 mA HART Loop Protocol and Channel-to-Channel Isolation

The module integrates a dedicated 4-20 mA HART loop protocol layer, enabling bidirectional digital data modulation superimposed on the standard analog signaling path. This allows simultaneous transmission of primary process variables and secondary diagnostics from smart field instruments to the controller interface. To ensure signal integrity under severe common-mode voltage differentials, the architecture features robust channel-to-channel isolation. This galvanic isolation barrier prevents cross-talk and mitigates ground loop current propagation, protecting internal bus logic from external field electrical transients and high-frequency noise interference.

Frequently Asked Questions

Q: Does the module support hot-swapping under live backplane power conditions?

A: Yes, the module supports online insertion and removal (OIR) within redundant configurations, provided the chassis grounding circuit remains continuous to prevent electrostatic discharge or bus disruption.

Q: What is the primary function of the integrated HART capability on this analog channel interface?

A: The HART subsystem permits pass-through routing of digital device variables, device status registers, and configuration commands alongside the primary 4-20 mA analog output execution loop without disrupting control signals.

Q: How should unused channels be handled to prevent fault indications on the controller diagnostics?

A: Unused channels should be disabled via the system configuration software utility or terminated using an appropriate external loop resistance across the physical terminal blocks to prevent open-circuit alarms.

Field Installation Guidelines

• Ensure the I/O termination assembly is rigidly mounted to the DIN rail prior to mating the electronic module to prevent pin misalignment on the backplane connection.
• All field wiring signal loops must utilize shielded twisted-pair cables, with the outer shield drain wire terminated exclusively at a single, dedicated instrument clean earth ground point.
• Maintain physical separation between low-voltage DC analog signal conduits and high-voltage AC power distribution cabling to minimize electromagnetic coupling induced loop errors.
• Confirm that the maximum loop impedance, including the field instrument load and wiring resistance, does not exceed the designated channel drive capacity under full 20 mA loop saturation.

Other Attributes

• Series: Honeywell Experion PKS(C200,C300)
• Country of Origin:  USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of Honeywell

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.