GE Fanuc FC200312 Central Processing Unit Module

Product Description

Configured for PLC logic execution and I/O coordination, the GE Fanuc FC200312 (FC200312 Central Processing Unit Module) provides processing functions for an industrial control architecture. The supplied specifications identify 240 Kbytes of configurable user memory, support for up to 4,096 discrete I/O points across 8 racks, and a 0.22 ms scan rate per 1K of logic memory.

Hardware Specifications

PLC Processing and Backplane Interface

The FC200312 performs central logic processing within the PLC hardware architecture. It accesses configured I/O resources across the supported rack structure and processes application logic according to the specified scan performance.

The module supports up to 4,096 discrete I/O points distributed across 8 racks. Therefore, rack and I/O allocation should follow the applicable controller hardware configuration. The supplied data does not identify a specific backplane communication protocol, network interface, or communication velocity, so these parameters should not be assumed for this model.

The 240 Kbytes of configurable user memory provides the stated memory area for controller application data and logic configuration. The specified scan rate is 0.22 ms per 1K of logic memory.

Frequently Asked Questions

Q: What operating voltage does the FC200312 require?
A: The supplied specification identifies a 24 VDC operating voltage.

Q: What I/O capacity does the FC200312 support?
A: The specified capacity is up to 4,096 discrete I/O points across 8 racks.

Q: Does the supplied specification confirm hot-swapping capability?
A: No. The supplied data does not specify hot-swap support. Hot-swap operation should therefore follow the applicable PLC system hardware documentation rather than being assumed.

Field Installation Guidelines

Install the FC200312 in the designated PLC hardware position and maintain mechanical clearance around the module for wiring access and servicing. Secure the module according to the applicable rack or mounting hardware instructions.

Connect the 24 VDC supply using the specified terminal arrangement. Verify polarity and supply isolation before energizing the module.

Route power wiring separately from high-level noise sources where practical. Keep signal and communication wiring organized to reduce unwanted electrical coupling.

Use the specified screw-terminal connections and tighten conductors according to the applicable GE Fanuc hardware installation requirements. Do not apply unsupported terminal configurations.

Where shielded wiring is used, terminate the shield according to the system grounding design. Avoid creating unintended ground loops between separate equipment grounding points.

Before commissioning, verify the module position, rack assignment, I/O configuration, supply voltage, terminal wiring, and controller configuration. Confirm that the installed hardware matches the intended PLC configuration before placing the control system into operation.

Other Attributes

• Series: GE Multilin 350 Feeder
• Country of Origin: USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of The GE General Electric Mark VI 

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

 TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.