Emerson 5A26141G06 Ovation Local I/O Bus Cordset Cable

Product Description

Configured for local I/O bus communication within the Emerson Ovation DCS, the Emerson 5A26141G06 REV08 (5A26141G06 Local I/O Bus Cordset Cable) provides a physical connection between controllers and local I/O hardware. Its pre-terminated DB9 connectors support cabinet-level cable installation, while the specified dual shielding addresses electromagnetic interference along the communication path.

Hardware Specifications

Ovation Local I/O Communication and Cable Shielding

The 5A26141G06 provides a physical cable connection between Ovation controller interfaces and local I/O hardware. The supplied specification identifies an RS-485 physical layer format and DB9 male connectors at both ends.

The dual-layer shielding consists of braided and foil shielding. These conductive layers help reduce electromagnetic and radio-frequency interference coupling into the cable conductors.

However, the supplied data does not define the pinout, cable impedance, termination arrangement, or maximum communication distance. Therefore, verify these parameters against the applicable Ovation system wiring documentation before commissioning.

Frequently Asked Questions (FAQ)

Q: What connectors does the Emerson 5A26141G06 use?

A: The cable uses DB9 male connectors at both ends. Confirm connector orientation and pin assignments against the approved system wiring diagram.

Q: Does the 5A26141G06 require an external power supply?

A: No external power supply is specified. The component is a passive cable assembly used for physical communication connections.

Q: How should the cable shield be grounded?

A: Follow the Ovation cabinet grounding and cable-shielding drawings. Avoid introducing unintended ground paths, and verify shield termination requirements before connecting the cable.

Field Installation Guidelines

1. Confirm the complete part number, REV08 identification, cable length, and connector configuration.
2. Inspect both DB9 connectors for damaged contacts, bent pins, or mechanical defects.
3. Verify the controller and local I/O connection points using the approved Ovation wiring documentation.
4. Route the cable through designated cabinet pathways and avoid sharp bends or mechanical strain.
5. Maintain separation from high-voltage conductors and other sources of electromagnetic interference.
6. Follow the system grounding drawings for braided and foil shield termination.
7. Secure the connectors using their designated retention hardware without applying excessive mechanical force.
8. Check cable continuity and connector seating before restoring system operation.
9. Verify local I/O communication through the applicable Ovation diagnostic interface.

Do not substitute cables based solely on connector appearance. Confirm pin assignments, electrical characteristics, and system compatibility before replacement.

Other Attributes

• Country of Origin: USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of Emerson DeltaV

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.