ABB RED615 5.0 FP1 IEC Line Differential Protection Relay

Product Description

Configured for phase-segregated line differential protection and feeder control in IEC 61850 based protection networks, the ABB RED615 5.0 FP1 IEC (RED615 line differential protection relay) provides direct physical and electrical execution for two-end overhead line and cable feeder applications.

Hardware Specifications

ABB Industrial Control Communication Characteristics

The ABB RED615 integrates IEC 61850 communication architecture with Ethernet-based substation automation functions. It supports GOOSE messaging for fast peer-to-peer protection signals and uses HSR and PRP redundancy protocols for network availability improvement. Additionally, IEEE 1588 v2 time synchronization maintains precise event recording and disturbance analysis.

The relay connects to two-end line protection schemes through fiber-optic communication channels or galvanic pilot wire interfaces. Therefore, the differential protection algorithm can compare current measurements from both line terminals and issue selective trip commands during internal faults.

The ABB Relion platform also supports firmware-controlled function management and configuration through ABB PCM600 engineering tools. Furthermore, the relay hardware provides continuous monitoring of communication channels, internal electronics, and external trip circuits.

Firmware and I/O Configuration Characteristics

The RED615 5.0 FP1 IEC uses ABB Relion firmware architecture to manage protection logic, measurement functions, and communication services. The configuration supports flexible assignment of binary inputs, outputs, and protection signals according to feeder protection requirements.

The relay supports deterministic Ethernet communication through IEC 61850 networks. In addition, the modular hardware design allows I/O density scaling through selectable configuration options without changing the basic relay platform.

Frequently Asked Questions

Q: Does the ABB RED615 support IEC 61850 GOOSE communication?
A: Yes. The RED615 5.0 FP1 IEC supports IEC 61850 Edition 1 and Edition 2 communication, including GOOSE messaging for protection and control signal exchange.

Q: What communication methods are available for two-end line differential protection?
A: The relay supports fiber-optic communication interfaces and galvanic pilot wire connections for differential protection channel transmission.

Q: Can the RED615 operate with redundant Ethernet networks?
A: Yes. The relay supports HSR and PRP redundancy protocols for IEC 61850 based Ethernet protection networks.

Field Installation Guidelines

• Install the relay inside a suitable protection cabinet with correct mechanical support and environmental protection.
• Connect current transformer and voltage transformer circuits according to the approved wiring diagram and protection engineering requirements.
• Use shielded communication cables for Ethernet and pilot wire connections where electromagnetic interference may affect signal quality.
• Connect cable shields according to substation grounding practices to reduce communication interference.
• Verify auxiliary supply polarity and rated voltage before energizing the relay.
• Perform protection setting verification, communication testing, and trip circuit supervision checks before commissioning.
• Maintain separation between protection wiring, power cables, and high-current conductors to minimize induced electrical noise.

Other Attributes

• Series: Advant DCS/800xA
• Country of Origin:  Germany/Sweden/Finland
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of ABB

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.