6ES7592-1BM00-0XB0 Siemens SIMATIC S7-1500 Front Connector

Product Description

Configured for I/O signal termination in SIMATIC S7-1500 automation systems, the Siemens 6ES7592-1BM00-0XB0 (6ES7592-1BM00-0XB0 Front Connector) provides direct physical connection between field wiring and 35 mm wide S7-1500 I/O modules through push-in terminals.

Hardware Specifications

Profinet / Industrial I/O Integration Characteristics

The 6ES7592-1BM00-0XB0 is a passive wiring interface component within the SIMATIC S7-1500 PLC platform. It provides structured termination of digital and analog I/O field conductors while maintaining compatibility with Siemens modular I/O density scaling concepts.

The front connector supports standardized module-side signal assignment and allows field wiring replacement without modification of the installed PLC module hardware. The push-in terminal mechanism provides direct conductor insertion and requires only a suitable screwdriver for conductor release.

The connector design supports consistent integration with SIMATIC S7-1500 backplane bus architectures, where module communication is handled through the CPU and system bus interface rather than through the front connector itself.

Frequently Asked Questions

Q: Can the 6ES7592-1BM00-0XB0 be used on any SIMATIC S7-1500 module?
A: This front connector is specified for 35 mm wide SIMATIC S7-1500 modules. Module width and connector compatibility must be verified before installation.

Q: Does this front connector provide electrical communication with the PLC CPU?
A: No. The component only provides field signal termination. Data exchange between I/O modules and the CPU is performed through the internal S7-1500 backplane bus.

Q: What conductor preparation is required for push-in terminals?
A: Conductors should be stripped according to the specified 8 mm to 11 mm length range. Ferrules must comply with the listed DIN 46228 requirements when used.

Field Installation Guidelines

• Install the front connector only on compatible SIMATIC S7-1500 modules with the specified 35 mm width.
• Verify conductor cross section before termination to ensure compatibility with the push-in terminal range.
• Use appropriate ferrules for flexible conductors where required by the wiring standard.
• Maintain correct terminal assignment according to the module wiring diagram before energizing the I/O system.
• Route signal wiring separately from high-current power cables to reduce electrical interference.
• Ensure cable strain relief and mechanical support are maintained after field wiring installation.
• Use the recommended screwdriver geometry to avoid terminal damage during conductor release.

Other Attributes

• Country of Origin:  Germany
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of SIEMENS

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.