SPGU240A1 | ABB Power Supply

Product Description

The ABB SPGU240A1, also identified as the SPGU240A1 power supply, converts AC or DC input power into a nominal 24 VDC output for industrial control equipment. The supplied specifications define an input range of 85-264 VAC or 90-350 VDC, with an output capacity of up to 10 A and 240 W. Output ripple and noise are specified at 50 mV maximum.

Hardware Specifications

Input Power Conversion and Output Regulation

The SPGU240A1 accepts either AC or DC input within the specified voltage ranges. Its nominal 24 VDC output supports loads with a maximum stated current of 10 A and a maximum output power of 240 W.

The specified efficiency is at least 90%. Actual input power depends on the connected load and operating conditions. Output ripple and noise must remain within the stated 50 mV limit under the applicable test conditions.

For system integration, verify the input source, output polarity, load current, and compatibility with the connected control equipment. The supplied data does not establish hot-swap capability, redundant operation, or galvanic isolation.

Frequently Asked Questions

Q: Can the SPGU240A1 operate from both AC and DC sources?

A: The supplied specifications list an AC input range of 85-264 VAC and a DC input range of 90-350 VDC. Confirm the manufacturer's wiring instructions before connecting either source.

Q: What are the maximum output current and power ratings?

A: The nominal output is 24 VDC, with a maximum stated current of 10 A and output power of 240 W. Ensure that the connected load remains within both limits.

Q: Is the SPGU240A1 suitable for redundant power configurations?

A: Redundant operation and load-sharing capability are not confirmed by the supplied specifications. Verify the manufacturer's documentation before using the unit in a redundant power arrangement.

Field Installation Guidelines

• Verify the model number and input voltage range against the equipment documentation before installation.
• Disconnect the power source before wiring or servicing the unit.
• Confirm input terminals, output polarity, protective earth requirements, and conductor sizing using the manufacturer's wiring diagram.
• Keep power conductors separate from low-level analog signal and communication wiring where practical.
• Check the connected load's steady-state current and startup demand against the 10 A output rating.
• Provide adequate ventilation and follow the manufacturer's clearance and ambient-temperature requirements.
• Measure the output voltage before connecting sensitive control equipment.
• Do not assume hot-swap support, output isolation, or redundant operation without confirmation from the applicable technical manual.

Other Attributes

• Series: Advant OCS/800xA
• Country of Origin:  Germany/Sweden/Finland
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of ABB

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.