ABB CB801 PROFIBUS DP Communication Module

Product Description

Configured for PROFIBUS DP communication in the ABB Panel 800 operator panel system, the ABB CB801 3BSE042245R1 (CB801 PROFIBUS DP Communication Module) provides a physical communication interface for data exchange between the operator panel and PROFIBUS DP networks. It operates as a slave expansion module and supports fieldbus communication with connected PLC and industrial control equipment.

Hardware Specifications

Industrial Network Communication Characteristics

The ABB CB801 supports PROFIBUS DP communication for Panel 800 operator panel installations. The module exchanges process and diagnostic information through the PROFIBUS network interface and supports communication rates up to 12 Mbps according to the supplied specification.

In ABB industrial control environments, communication hardware must maintain correct network configuration, cable shielding, termination, and station addressing. Therefore, installers should configure the CB801 according to the connected PROFIBUS network architecture and controller requirements.

The module also supports cyclic process data exchange and acyclic communication functions associated with PROFIBUS DP-V1 operation. However, actual available functions depend on the connected Panel 800 configuration and host network implementation.

Frequently Asked Questions

Q: What is the primary function of the ABB CB801 3BSE042245R1?
A: The CB801 functions as a PROFIBUS DP communication interface for ABB Panel 800 operator panels. It enables the panel to exchange communication data with a PROFIBUS DP network as a slave expansion module.

Q: Does the CB801 support high-speed PROFIBUS communication?
A: According to the supplied data, the module supports PROFIBUS DP communication rates up to 12 Mbps. The actual network speed depends on cable length, network configuration, and connected device compatibility.

Q: What should be checked before installing the CB801 module?
A: Verify Panel 800 compatibility, network station addressing, PROFIBUS cable shielding, connector installation, bus termination requirements, and the communication parameters configured in the connected automation system.

Field Installation Guidelines

Install the ABB CB801 3BSE042245R1 only after disconnecting or isolating equipment power according to the applicable installation procedure.

Mount the module according to the mechanical requirements of the ABB Panel 800 system. Ensure that the communication connector is fully seated and secured before system startup.

Use PROFIBUS cable and connector components suitable for the installed network. Maintain shielding continuity and apply the grounding method required by the system installation standard.

Keep PROFIBUS communication wiring separated from high-current switching cables and motor power conductors where practical. This reduces the effect of electrical interference on communication signals.

Verify bus termination at the physical ends of the PROFIBUS segment. Incorrect termination or station addressing can prevent communication or cause intermittent network faults.

After installation, confirm communication status through the Panel 800 configuration and connected PLC or automation controller diagnostics.

Other Attributes

• Series: Advant DCS/800xA
• Country of Origin:  Germany/Sweden/Finland
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of ABB

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.