IS200EDEXG1B GE EX2100e Exciter De-Excitation Control Board
Spécifications techniques
Manufacturer: GE General Electric
Condition:New with Original Package
Product Type: Exciter De-Excitation Control Boards
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
En soumettant une demande pour cet article, vous confirmez que vous avez examiné et accepté nos Conditions Générales. Veuillez noter que toutes les transactions seront traitées hors ligne.
Demandez à un expert
Aidez-nous à toucher plus de personnes ! Partagez ce produit avec votre réseau et montrez votre soutien !
Product Description
The GE IS200EDEXG1B is an Exciter De-Excitation Control Board designed for the EX2100e excitation control system. It serves as the main board of the EDEX de-excitation module and controls the discharge of stored energy from the generator field during emergency shutdown. Furthermore, it incorporates SCR firing circuits, conduction sensing feedback, and voltage retention to support de-excitation operation during a power interruption.
De-Excitation Function
The EDEX board controls the removal of stored energy from the generator field when an emergency shutdown opens the field breaker or associated contactors. This process helps bring the excitation circuit to a de-energized state.
The EXTB board coordinates the de-excitation sequence. When EMIO initiates the command, EXTB activates the 41DC contactor (MDA/MDB) or field breaker. It then transfers signals from the auxiliary contacts to the EDEX SCR firing circuits, allowing the board to execute the de-excitation function.
SCR Firing and Control Logic
The IS200EDEXG1B receives two firing commands through the EXTB board. These commands activate the firing circuit using redundant control paths. Once triggered, the circuit generates a high-frequency square wave that drives the SCR gate and initiates conduction.
In addition, the board includes a self-firing circuit as a backup firing mechanism. If the primary firing circuit fails or responds too slowly, a break-over diode network connected to the SCR gate can initiate conduction based on the SCR anode voltage.
De-Excitation Configuration
GE identifies two EDEX board groups according to their de-excitation arrangements:
- Group 1: Designed for SCR de-excitation.
- Group 2: Designed for diode de-excitation.
Therefore, the board group must match the installed excitation and de-excitation configuration. The exact group classification of the IS200EDEXG1B should be confirmed against its hardware identification and the applicable EX2100e configuration before replacement.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | IS200EDEXG1B |
| Brand | General Electric (GE) |
| Product Type | Exciter De-Excitation Control Board |
| Series | EX2100e |
| Function | Generator field de-excitation control |
| Main Function | Controls stored-energy removal from the generator field |
| Firing Control | Two firing commands through EXTB |
| Firing Circuit | Redundant SCR firing control |
| Backup Firing Circuit | Self-firing circuit using a break-over diode network |
| Feedback | SCR conduction sensing |
| Voltage Support | Voltage retention |
| Associated Control Board | EXTB |
| Contactor Reference | 41DC (MDA/MDB) |
| Country of Manufacture | United States (USA) |
Frequently Asked Questions
Q: What is the main function of the GE IS200EDEXG1B?
A: It controls generator field de-excitation during emergency shutdown. When the field breaker or contactors open, the EDEX board operates the SCR firing circuits to remove stored energy from the generator field.
Q: How does the IS200EDEXG1B provide backup SCR firing?
A: It includes a self-firing circuit based on a break-over diode network. If the primary firing circuit fails or is delayed, the network uses the SCR anode voltage to trigger the SCR gate.
Q: What is the difference between Group 1 and Group 2 EDEX boards?
A: Group 1 boards are designed for SCR de-excitation, while Group 2 boards are designed for diode de-excitation. The correct group must match the installed excitation system configuration.
Other Attributes
- Series: Mark VI IS200
- Country of Origin: USA
- Lead Time: In Stock, 2 Working Days
In Stock Hot Items of The GE Speedtronic Mark V
| DS200TCQAG1BFD | DS200SLCCG3AFG | DS200TCCBG1BED |
| DS200TCQCG1BHF | DS200SLCCG1AHH | DS200TCCBG3ANE |
| DS200TCQCG1BGK | DS200SLCCG1ACC | DS200PCCAG2ACB |
| DS200TCRAG1ACC | DS200SLCCG3ADC | DS200TCDAH1BHD |
| DS200TCTGG1AFF | DS200TCEAG1BRE | DS200TCDAH1BHE |
| DS200EXPSG1ABB | DS200TCEAG1BSF | DS200DCFBG1BLC |
| DS200EXPSG1ACB | DS200TCEAG1BTF | DS200PTBAG1AEC |
| DS200QTBAG1ADC | DS200TCCAG1BAA | DS200DTBAG1AAA |
| DS200TBQBG1ACB | DS200DTBBG1ABB | DS200TCQCG1BKG |
| DS200TBQAG1ABB | DS200TCPSG1AME | DS200TCQAG1BHF-w01 |
| DS200RTBAG2AHC | DS200TCPSG1ARE | DS200SDCCG5AHD |
| DS200SDCCG1AEC | DS200GDPAG1ALF | DS200SLCCG3AGH |
Our Competitive Brands
- - ABB Advant-800xA,Advant OCS,Bailey Infi 90 and Net 90,H&B Freelance 2000,DSQC Robots,IGCT / IGBT
- - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
- - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
- - Bently Nevada 3300 System, 3500 System
- - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
- - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
- - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider
Question 1: Is Our Price Competitive?
NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.
Question 2: What Is The Warranty Period?
We offer a standard one-year warranty for all new and original items.
Question 3: What Payment Methods Do We Accept?
We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.
Question 4: What Shipping Methods Do We Use?
We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.
Question 5: What Is Our Delivery Time?
Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.
Question 6: How Do We Package The Goods?
Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.
Question 7: How Can Customers Contact Us And Request A Quote?
Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.